Usage of time filter with ETM screen should not start the refresh again if refresh is deactivated/stopped before the filter screen is used to show historic data

Usage of time filter with ETM screen should not start the refresh again if refresh is deactivated/stopped before the filter screen is used to show historic data

Summary

Applying a filter with refresh reate > 0 re-starts ETM refresh

Description

Applying a filter with refresh reate > 0 re-starts ETM refresh

Information

You can use 2 different ETM screens. One is with an refresh rate, and one is used with a refresh rate of 0 seconds.

If you use the time filter, you can execute it with a zenon script and execute the time filter and the screen switch function to the not refreshed ETM screen.



Issue Number: 243678
Fixed on Date: 13.8.2021
Versions: 8.20 0 BUILD 87225 | zenon Analyzer 3.40 0 BUILD 87645 | 10 0 BUILD 87728

    • Related Articles

    • Checklist: Data Missing in Service Engine

      Time estimate: 60 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...

    • Checklist: zenHelpService cannot start

      Time estimate: 15 minutes Please go through all the items in the following checklist. If necessary, confirm any information you cannot verify with the IT department before contacting your local COPA-DATA representative. If during the installation of ...

    • Checklist: Engineering Studio cannot start or closes unexpectedly

      Time estimate: 30 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...

    • FAQ: What is the time zone and time format used in zenon Software Platform products and what needs to be considered?

      When you ask someone what the time is, they'll usually be able to tell you. But when you ask them what date and time sunrise was yesterday in a different country on a different continent, in a different hemisphere it gets less easy. Terms like GMT ...

    • Checklist: Process Gateway cannot start

      Time estimate: 30 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...