Time in ETM is counting up when using specific configuration with time filter screen

• Related Articles

• Usage of time filter with ETM screen should not start the refresh again if refresh is deactivated/stopped before the filter screen is used to show historic data

  Summary Applying a filter with refresh reate > 0 re-starts ETM refresh Description Applying a filter with refresh reate > 0 re-starts ETM refresh Information You can use 2 different ETM screens. One is with an refresh rate, and one is used with a ...

• The screen switch function to a Report Generator screen sometimes does not save the time filter settings.

  Summary The screen switch function to a Report Generator screen sometimes does not save the time filter settings. As soon as the screen switch function configuration is opened again, the previously configuration is lost. DescriptionThe screen switch ...

• Time from Time Filter Screen Type is not correctly acquired in Extended Trend Screen Typ.

  Summary Screen Switch Function in order to open a Extended Trend sceen typ, and is define a Time/Lot Picture for substitute the standard Time Filter Dialog Box, the time defined in the Time/Lot Filter is not correctly managed  from the Extended Trend ...

• Under specific circumstances control elements in the alarm message list filter screen are not displayed

  Summary Under specific circumstances the time filter combobox element is not displayed in the alarm message list filter screen Description Under specific circumstances the time filter combobox element is not displayed in the alarm message list filter ...

• Runtime on client hangs/stops working if time filter / diagram settings in Extended Trend screen are changed

  Summary If you change the time filter in an ETM screen diagram on the client, the client project stops working. Description If you change the time filter in an ETM screen diagram on the client, the client project stops working. Solution The curve ...