TIA Driver crashes after starting communication to the PLC with a specific project
TIA Driver crashes after starting communication to the PLC with a specific project
Description
The TIA driver crashed, if an import has been done from a PLC project
(or the project has been started in the Runtime or the Service Engine) in
a build that used AGLink in version 6.0.2.0.
To fix this
issue the AGLink version has been updated to 6.0.2.5.
To benefit from this fix:
Update your
zenon Software Platform to the latest build of zenon 10 or higher.
Time estimate: 30 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. TwinCAT ADS communication library ...
Time estimate: 60 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...
Data quality is very important to the integrity of a HMI or SCADA system. As such, zenon has numerous ways to monitor the communication status of different devices within your automation environment. Here are some options that you can use in your ...
Time estimate: 60 minutes Please go through all the items in the following checklist. If necessary, confirm any information you cannot verify with the IT department before contacting your local COPA-DATA representative. Checklist usage: #. [Quick ...
Summary Solution The S7TIA driver shall communicate with a PLC also without a TIA project. Issue Number: 37563 Fixed on Date: 19.1.2017 Versions: 7.50 0 BUILD 34636