The Weihenstephan client driver in the zenon logic stops working if for a LIST in the Weihenstephan client driver more than 256 tags are configured

• Related Articles

• zenon Logic: Weihenstephan Standard Client driver not available any more

  Summary Added missing entries. Description Added missing entries. Information With zenon 8.0 there was a change made to use the file "%cd_programdata8000%\straton\IODList_EN.xml" (or IODList_DE.xml, depending on the language of the Logic Editor), in ...

• When selecting the tab Offline MIB list of the SNMPNG32 driver without having any agents configured under tab SNMP Agents, the SNMPNG32 driver stops working.

  Summary The SNMPNG32 driver stops working when selecting the tab Offline MIB list of the SNMPNG32 driver without having any agents configured under tab SNMP Agents. DescriptionThe SNMPNG32 driver stops working when selecting the tab Offline MIB list ...

• Checklist: The Logic Service to Service Engine connection does not work

  Time estimate:   30 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Screenshot and followed ...

• Changing the IP address or port number in the "upload device configuration" dialog in the Weihenstephan standard Client driver is not taken over

  Summary If a Weihenstephan standard client driver exists in the zenon logic and a Weihenstephan standard server is configured with IP address and port number, these settings are taken over and offered in the "upload device configuration" dialog on ...

• zenon Process Gateway ICCP (TASE.2) stops working during association with particular ICCP test client.

  Summary Issue during try to associate with Iron IEC 60870-6 ICCP/Tase2 Test Tool from Triangle MicroWorks: zenon Process Gateway stops working. It happens after the Test Tool (remote ICCP client) sends frame with malformed ASN.1 stream. ...