The Profinet Controller driver for zenon logic does not start on Windows Embedded Compact 7 (Windows CE 7)

• Related Articles

• FAQ: Windows CE not supported anymore with zenon! What are the main reasons and what do I have to consider? Is zenon not able to run on Windows CE anymore?  

  The support for zenon Windows CE Versions was frozen with the zenon Version of 7.20. This means that in any higher zenon version, the CE Version delivered with the Setup is a zenon CE Version of zenon 7.20. There are no more functional enhancements ...

• FAQ: Update CE proceedure

  Pre-requisites: Windows CE device, with area for persistent storage. PC with zenon CE installed. TCP/IP connection between PC and CE device. syssrvce.exe for the appropriate platform on the CE device. Since version 7.11 additionally 5 files have to ...

• zenon Logic fieldbus driver => Hilscher cifX Profibusœ doesn't work under Windows 7 Embedded Standard OS

  Summary The zenon Logic fieldbus driver => Hilscher cifX Profibusœ can not be used propperly under the operating system Windows 7 Embedded Standard. Description The zenon Logic fieldbus driver => Hilscher cifX Profibusœ can not be used propperly ...

• It is not possible to set negative values with the BeckhNG Driver on Windows 7 embedded compact.

  Summary Under Windows 7 embedded compact it is not possible to send negative values with the beckhNG from the zenon runtime to the PLC. DescriptionUnder Windows 7 embedded compact it is not possible to send negative values with the beckhNG from the ...

• When wrong configured Profinet driver stops the zenon Logic Runtime, the IEC61850 Server driver hangs

  Summary Circumstances under which this can happen: zenon Logic (straton) project has Profinet driver and IEC61850 Server driver the Profinet does not have correct Adapter identification so cannot start the iec850 server has all settings OK. Issue ...