T5BEV: data loss of ~ 20 seconds after ethernet connection is lost and re-established

• Related Articles

• Checklist: VSTA IDE: "Error: Unable to create macro projects. Is the correct project template installed?"

  Time estimate:   15 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. For yet unknown reason the path ...

• [S7TCP32] Alarm_[S|8|8P] variables stay invalid after connection loss and re-connection

  Description In the S7TCP driver, variables of the driver object types Alarm‑S Attribute and Alarm‑S Message continued to show the Invalid status after the connection was re-established. The issue has been addressed and the behavior is now as ...

• Checklist: Data Missing in Service Engine

  Time estimate: 60 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...

• OPCUA32: static variables remain INVALID after very short connection loss

  Summary When the OPCUA32 OPC UA client driver experiences a short connection loss, and the connection can be re-established immediately, variables that do not change on the OPC UA server side, remain with INVALID status in the runtime, until the ...

• OPCUA State Variable Response During Ethernet Disconnection

  Description In case of an Ethernet communication loss the OPC UA client state variable remained unchanged and did not provide information about the lost connection with an OPC UA server. The issue has been addressed and the OPC UA client state ...