STRATONNG driver sends out write command with wrong value 0 for pokes received immediately after startup
Description
If STRATONNG variables have been used in the class linking and the Service Engine is closed, these counters are reset to 0 at next start. This led to incorrect information in the Service Engine.
The issue has been fixed and the behavior is now as expected.
To benefit from this fix:
- Update your zenon Software Platform to the latest build of zenon 14 or higher.
Item ID: 283694
Version: 14.00 Build: 257014
Related Articles
FAQ: When I activate the option "write synchronously" for the Recipegroup manager recipe, and I write the recipe, the recipe does not seem to be written properly and also the Service Engine does not close properly. Why is that?
When the option "write synchronously" is active at a recipe, when writing a recipe (sending values to the PLC) for each recipe variable a writing confirmation is requested to the driver. On a successfull write, the driver sends a writing confirmation ...
Checklist: Driver(s) cannot establish a reliable communication
Time estimate: 60 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...
FAQ: It seems that sometimes not all variables are correctly written to the PLC by the RGM module, although the system driver variable states that the recipe was written successfully and the option "write synchronously" is active. How can this be?
When reading a RGM recipe immediately after writing a RGM recipe, with a driver that has the option "keep update list in memory" active, and recipe variables that have been read previously, it can happen that a read cycle is currently in progress, ...
IEC61850 Server: no buffer-overflow bit after a client sends wrong EntryID
Summary When a client reconnects and sends wrong EntryID as request for buffered reports the IEC61850 Server (zenon Logic I/O driver) logs an error and responses this MMS.Write negative. Then the IEC61850 Server sends all buffered reports - so acts ...
STRATONNG driver. General request fail
Summary STRATONNG-driver. General request fail => there are no values. The problem is that the driver does not get the required event. (DiagViewer) Description STRATONNG-driver. General request fail => there are no values. The problem is that the ...