Service Engine crash at start
Description
The Service Engine was closed unexpectedly on startup
due to a misconfiguration where an Alternative Data Point (ADP) variable was
used simultaneously as a source.
The issue has been addressed by ignoring
write operations of ADP variables configured in this manner.
To benefit from this fix:
- Update your zenon Software Platform to the latest build of zenon 14 or higher.
Item ID: 299180
Version: 14.00 Build: 405141
Related Articles
Checklist: Process cannot or takes a long time to start
Time estimate: 45 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...
Checklist: Process closes unexpectedly (***Non-reproducible***)
Time estimate: 45 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...
FAQ: How can I backup the Service Engine data, the data created during Service Engine?
The path of the Service Engine folder can be amended in the project properties and it is set into zenon6.ini (VBF30=) when the start project is set in Engineering Studio or in zenon Startup Tool. In the Service Engine folder, there is the subfolder ...
WVS crash with specific project
Description The WVS crashes with a certain project immediately after the start. This project has defined an ETM screen or a Login screen as the startup screen, which do not contain screen filters. Starting the Service Engine with these screens is not ...
Checklist: Data Missing in Service Engine
Time estimate: 60 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...