[S7TCP32] Alarm_[S|8|8P] variables stay invalid after connection loss and re-connection

• Related Articles

• OPCUA32: static variables remain INVALID after very short connection loss

  Summary When the OPCUA32 OPC UA client driver experiences a short connection loss, and the connection can be re-established immediately, variables that do not change on the OPC UA server side, remain with INVALID status in the runtime, until the ...

• FAQ: How can I monitor and react on the communication status of my devices with zenon?

  Data quality is very important to the integrity of a HMI or SCADA system. As such, zenon has numerous ways to monitor the communication status of different devices within your automation environment. Here are some options that you can use in your ...

• The OPCUA32 client driver does not resume communication after short network connection loss under specific circumstances.

  Summary When the network connection between the OPCUA32 client driver and the OPC UA server is lost for a specific short period where TCP retransmits may still reach the server after the connection is established and where the connection loss is long ...

• invalid variables of IEC870_103 driver have no value when readvised

  Summary issue when IEC870_103 driver has no connection with PLC: after variable(s) with status INVALID was unadvised (e.g. screen with variables was closed or other screen opened based on the same frame) - the re-advised variable has neither value ...

• When using 3S_V3 driver in redundant mode, a communication loss to the primary and secondary PLC will not lead to invalid bits in the runtime. When the primary and secondary PLC is available again, the 3S_V3 driver does not reestablish the connection and although the variables in the zenon runtime show the SPONT bit, no communication is possible.

  Summary When the 3S_V3 is used in redundant mode, the variables in the zenon runtime do not get invalid when the connection to the primary and secondary PLC is lost. The 3S_V3 also does not reestablish the connection to the primary or secondary plc ...