S7TCP driver is adding the timezone difference to a value of a DATE_AND_TIME Variable

• Related Articles

• FAQ: What is the time zone and time format used in zenon Software Platform products and what needs to be considered?

  When you ask someone what the time is, they'll usually be able to tell you. But when you ask them what date and time sunrise was yesterday in a different country on a different continent, in a different hemisphere it gets less easy. Terms like GMT ...

• Checklist: Driver(s) cannot establish a reliable communication

  Time estimate: 60 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...

• S7TCP32 driver stops if you read DATE AND TIME variable with wrong time values

  Summary The S7TCP32 driver stops if it reads a DATE AND TIME variable with a wrong time value. That means one of the following Byte values is out of range: Byte 3 - hour - crash with value 30 or higher Byte 4 - minute - crash with a value 90 or ...

• Checklist: zenon Driver does not start in zenon 11 Engineering Studio / Service Engine.

  Time estimate: 15 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. In zenon 11 and newer versions, ...

• IEC62056-21 driver, variable with datatype 'Date and Time' lead to driver stop if timestamp is invalid.

  Summary A variable with the datatype 'Date and Time' and set the IEC62056 address to 96.70 - the driver will stop as soon as the RT is started. On this device it seem the timestamp for this address is invalid. Description A variable with the datatype ...