RT crash after switching from process recording into simulation mode and replay data from a mulit project
Summary
The runtime crashed at beginning of process replay if the start time is earlier than what the earliest file contains (including time from image data), which where transferred to the replaying client.
In this case only the files of a specific day where transferred to the replaying client and on this day there where only files after 16:00 and no image data was in the first file (obviously runtime was started that day). The replay start time was 15:00.
The runtime sporadically crashed using the scrollbar and triggering a project reload that closes all screens in cases with a lot of memory usage (in this case direct x software was used).
Description
The runtime crashed at beginning of process replay if the start time is earlier than what the earliest file contains (including time from image data), which where transferred to the replaying client.
In this case only the files of a specific day where transferred to the replaying client and on this day there where only files after 16:00 and no image data was in the first file (obviously runtime was started that day). The replay start time was 15:00.
The runtime sporadically crashed using the scrollbar and triggering a project reload that closes all screens in cases with a lot of memory usage (in this case direct x software was used).
Issue Number: 135781
Fixed on Date: 21.6.2018
Versions: 8.00 0 BUILD 48821
Related Articles
FAQ: What are the different zenon drivers modes?
All Service Engine process-driven drivers can run in four different modes, mainly allowing you to switch between active hardware connection and values simulation. While "Hardware" allows establishing a connection to the target device(s) and its the ...
Checklist: Process closes unexpectedly (***Reproducible***)
Time estimate: 30 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...
Checklist: Process closes unexpectedly (***Non-reproducible***)
Time estimate: 45 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...
Checklist: Data Missing in Service Engine
Time estimate: 60 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...
FAQ: How, where, why and when does zenon Service Engine save data?
zenon Disk Space Handling: The zenon Service Engine, by default, stores process data on the hard disk. This is true for a standalone zenon project, as well as the zenon Service Engine server(s) in the zenon network topology. This data consists of ...