Remote Transport load / disconnect crashes Engineering Studio c_cdtoolsMultitasking()
Remote Transport load / disconnect crashes Engineering Studio c_cdtoolsMultitasking()
Description
The <NAME_ENGINEERING_STUDIO> crashes when the Remote Transport is connected for a long time, and then a change load or remote transport disconnect is performed.
This behavior has been fixed. To benefit from this fix:
Upgrade to the latest build of zenon Software Platform 10 or later.
Time estimate: 30 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...
Time estimate: 45 minutes Please go through all the items in the following checklist. If necessary, confirm any information you cannot verify with the IT department before contacting your local COPA-DATA representative. Checklist usage: #. [Quick ...
Time estimate: 30 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...
The remote transport verifies if there is license present on the remote machine. Since the license system changed with zenon 8.00 the remote system doesn't recognize the activated (8.00 or higher) license. To bypass the problem it is enough to insert ...
If a user forgets his Engineering Studio password, the administrator can remove the password and assign a new initial password. The administrator does not require knowing the password for these interventions. Recommendations: Create an administrator ...