Point specific setting for event handling in the DNP3 process gateway is not correctly taken in account

• Related Articles

• Checklist: Process Gateway cannot start

  Time estimate: 30 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...

• Checklist: Process Gateway cannot establish a reliable communication

  Time estimate: 45 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...

• Process Gateway IEC870Slave is not handling correctly DPI-mapping for zenon variable configured to be more as one IOA

  Summary Issue in zenon Process Gateway IEC 60870 Slave by DPI/DCS mapping when one zenon variable is configured in a sector many times. If you create in a sector two or more IOs as 'double point information' - type id. <3>, <4> or <31> - and link ...

• Checklist: Process is not responding

  Time estimate: 60 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...

• Checklist: Process closes unexpectedly (***Non-reproducible***)

  Time estimate: 45 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...