MODRTU32: Altough the PLC terminates the communication with TCP FIN, the driver is still sending queries

• Related Articles

• Checklist: Driver(s) cannot establish a reliable communication

  Time estimate: 60 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...

• Checklist: Communication to TwinCat via BeckhoffNG driver

  Time estimate: 30 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. TwinCAT ADS communication library ...

• Checklist: Smart Client cannot establish a reliable communication

  Time estimate: 60 minutes Please go through all the items in the following checklist. If necessary, confirm any information you cannot verify with the IT department before contacting your local COPA-DATA representative. Checklist usage: #. [Quick ...

• FAQ: How can I monitor and react on the communication status of my devices with zenon?

  Data quality is very important to the integrity of a HMI or SCADA system. As such, zenon has numerous ways to monitor the communication status of different devices within your automation environment. Here are some options that you can use in your ...

• Driver Phoenix: connect to PLC ProConOS initialisation / timing problem

  Summary When connecting to a PLC the driver sends REC_DATA telegram (without data) although it is not connected or logged in to the PLC. This leads to wrong and not working communication conditions that could even bring down PLC. Description When ...