Loading device settings for Protocol e101 may not work after source change for redundancy support of e104

Loading device settings for Protocol e101 may not work after source change for redundancy support of e104

Description

The configuration for Access IEC8870-101 is no longer possible in zenon Process Gateway. The device settings are not loaded.

The cause was the implementation of redundancy support for IEC870-104.

This error has been fixed. All types supported in the protocol work as expected again. This applies to: 870-104, 870-101 unbalanced, 870-101 balanced and 870-104 redundancy / IPv6 f.

To benefit from this fix:

  • Update your zenon Software Platform to the latest build of zenon 11 or higher.


Item ID: 274976
Version: 12.00 Build: 220199
Version: 11.00 Build: 219314

    • Related Articles

    • FAQ: Where can I find the XML device profile for COPA-DATA DNP3 drivers?

      What is a DNP3 XML device profile? Where can I find the XML device profile for one of the following drivers? DNP3_TG - Subset Level 1,2,3 and 4 for both requests and responses, DNP3 Master driver for zenon Service Engine AccessDNP3_SG - Subset Level ...

    • Checklist: Smart Client does not work

      Time estimate: 20 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...

    • The "set value/change by" property may not work in the runtime.

      Summary The dynamic text element "set value/change by" property may be discarded in the runtime if the write set value is done directly in the element, so that it is only proposed the current value or displayed the input cursor when the element is ...

    • Checklist: SAP Interface does not work

      Time estimate:  30 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick ...

    • FAQ: CodeMeter Dongles are changed from a mass storage device type to a HID device type.

      Within June 2015 the CodeMeter dongles are changed from a Mass Storage Device type to a HID type. HID stands for Human Interface Devices and is usually used for devices like a USB mouse or keyboard. This affects all dongles from serial number ...