ISPIP: Resetting of an alarm does not work as expected

• Related Articles

• The function for the handling of alarm message list and/or chronological event list printing didn’t work as expected.

  Summary The ‘print AML or CEL’ function of the group contains functions for the handling of the alarm message list (AML) and the Chronological Event List (CEL) didn’t work anymore.   DescriptionThe ‘print AML or CEL’ function of the group contains ...

• Alarm causes do not work with redundancy

  Summary Now alarm causes should continue to work correctly on the Standby when the server goes down Description Now alarm causes should continue to work correctly on the Standby when the server goes down Issue Number: 145857 Fixed on Date: 20.7.2018 ...

• Alarm Filter Issue When Using Reactivated Time Option in AML

  Summary The AML filter does not work as expected in the Service Engine for alarms with active project property "Use reactivated time". This has been modified. Description If an alarm occurs within the set filter time, it is indicated correctly. If ...

• AML: Comment for Alarm disappears in Data Storage

  Summary The reason for the disappearing comments (and also alarm causes) was that the ringbuffer was not correctly synchronized with historic data when binary files were disabled. Also acknowleding and confirming acknowledge was not correctly ...

• Checklist: Smart Client does not work

  Time estimate: 20 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...