Incorrect IP Address is configured for IEDs in IEC850 Driver Configuration Wizard from Specific SCD file

• Related Articles

• Incorrect IP Address is configured for IEDs in IEC850 Driver Configuration Wizard from Specific SCD file

  Description When configuring an IEC850 driver with the IEC850 Driver Configuration Wizard, errors occur during the parsing of the SCL file. An incorrect IP address is suggested for the IED. This error has been fixed. IEDs are created with the correct ...

• IEC61850DriverConfigurationWizard.scadaAddIn: wizard displays exception and does not load specific .scd file

  Description The IEC 61850 driver configuration wizard does not read SCD files correctly from zenon 8.10 onwards. Reading is started, but the wizard is then closed with an unhandled exception. In zenon 8.00, reading takes place without errors. This is ...

• Checklist: Communication to TwinCat via BeckhoffNG driver

  Time estimate: 30 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. TwinCAT ADS communication library ...

• Checklist: Driver(s) cannot establish a reliable communication

  Time estimate: 60 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...

• Redundant License Configuration

  Starting from zenon version 8.00 it is possible to share each license over the CodeMeter network. This allows you to have a dedicated license server. The license server can be any PC or virtual machine which runs CodeMeter. One license for two ...