Incorrect IP Address is configured for IEDs in IEC850 Driver Configuration Wizard from Specific SCD file

• Related Articles

• Incorrect IP Address is configured for IEDs in IEC850 Driver Configuration Wizard from Specific SCD file

  Summary Incorrect IP Address is configured for IEDs in IEC850 Driver Configuration Wizard from Specific SCD file Description Incorrect IP Address is configured for IEDs in IEC850 Driver Configuration Wizard from Specific SCD file Issue Number: 210972 ...

• Checklist: Communication to TwinCat via BeckhoffNG driver

  Time estimate: 30 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. TwinCAT ADS communication library ...

• IEC61850DriverConfigurationWizard.scadaAddIn: wizard displays exception and does not load specific .scd file

  Description The IEC 61850 driver configuration wizard does not read SCD files correctly from zenon 8.10 onwards. Reading is started, but the wizard is then closed with an unhandled exception. In zenon 8.00, reading takes place without errors. This is ...

• Checklist: Driver(s) cannot establish a reliable communication

  Time estimate: 60 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...

• Wizard IEC61850 driver configuration incorrectly configures report (RCB)

  Description When configuring an IEC850 driver with the IEC850 Driver Configuration Wizard, errors occur in the RCB references. An incorrect RCB name is configured for the client assignment. This error has been fixed. RCBs are configured correctly ...