In zenPG, with ICCP/TASE.2 Server, the external variable quality flags are not mapped correctly

• Related Articles

• zenPG ICCP TASE.2: when remote ICCP-Server refuses association then the Client constantly attempts to reconnect.

  Summary zenon Process Gateway ICCP TASE.2: If remote ICCP-Server is available via TCP but rejects the socket connection, then the Client constantly attempts to reconnect (every ~50ms). When succesfully associated connection is broken then the zenPG ...

• zenPG ICCP-TASE.2 Server does not respond to READ request from Client

  Summary zenPG ICCP-TASE.2 Server does not always respond to READ request from client when domain specific addressing is configured. Description zenPG ICCP-TASE.2 Server does not always respond to READ request from client when domain specific ...

• Checklist: OPCDA Server

  Time estimate: 20 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Do NOT use DCOM in combination ...

• zenPG ICCP responds with malformed frame when a remote ICCP-client sends MMS.Read request with flag specificationWithResult=true.

  Summary zenon Process Gateway ICCP-TASE.2 responds with malformed frame when a remote ICCP device requests a MMS.Read with flag specificationWithResult=true. This optional flag demands that the response will contain not only values but also names of ...

• While type mismatches zenon Process Gateway ICCP-TASE.2 as client on data set reception is corrupting value of not mismatched variables

  Summary zenon Process Gateway ICCP TASE.2 is mismatching received values - all (or some) of zenon variables linked in ICCP-client. It transfers to the Runtime values of another received data points or random. It happens only when by one (or more) ...