In Extended Trend doesn't show number of main ticks if you move up X-Axis.

• Related Articles

• Extended Trend Screen can not be zoomed on the x-Axis (Time-Axis) if Lot Filter is applied directly

  Summary When displaying data based on a lot filter on an Extended Trend screen, you can not zoom on the x-Axis if the Lot Filter in the Screen Switch Function is set to "Apply Lot filter directly". Fix: Even when lot(s) are filtered directly, the ...

• extended trend cursor scanning does not show milliseconds

  Summary At the moment the scanner windows does not show the milliseconds, only the axis in the trend is capable of showing the milli seconds. If the ETM Property for the x-Axis is set to show Milli Seconds (Scale - MS) -> also the scan Window should ...

• Context Menu - show Extended trend on More monitor system

  Summary Context menu "Show Extended Trend" was always opening trend screen on first monitor. Description Context menu "Show Extended Trend" was always opening trend screen on first monitor. Issue Number: 179320 Fixed on Date: 27.3.2019 Versions: 8.00 ...

• The zenon Runtime closes unexpectedly during moving axis at the Extended Trend.    

  Summary It may occur that the zenon Runtime close unexpectedly by moving vertical axis at the Extended Trend Screen.   DescriptionIt may occur that the zenon Runtime close unexpectedly by moving vertical axis at the Extended Trend Screen.   Solution ...

• Filter settings Position "% of the width of the Y-Axis" in tab X-Axis is not configurable from -100 up to +100.

  Summary If you move down/up the X-Axis on the Diagram Window - trend display control, below/above allowed range, he will then see "message" on filter settings as long as he will not adapt it to the range 0-100. Without that, he cannot "save" ...