IEC870 Driver reject commands depending on successfull general interogation

• Related Articles

• Checklist: Driver(s) cannot establish a reliable communication

  Time estimate: 60 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...

• IEC850 Client driver in commands sends the time stamp with FractionOfSeconds = 0

  Summary IEC 61850 Client driver sends in commands - SBOw, Oper, Cancel - the time stamp but the FractionOfSeconds bytes (milliseconds) are 0. Description IEC 61850 Client driver sends in commands - SBOw, Oper, Cancel - the time stamp but the ...

• Checklist: Communication to TwinCat via BeckhoffNG driver

  Time estimate: 30 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. TwinCAT ADS communication library ...

• STRATONNG driver. General request fail

  Summary STRATONNG-driver. General request fail => there are no values. The problem is that the driver does not get the required event. (DiagViewer) Description STRATONNG-driver. General request fail => there are no values. The problem is that the ...

• Sprecon870: ALT_VAL Bit behaves different depending on used Driver Object Type (PLC Marker vs Group)

  Description The behavior of the SPRECON870 driver ALT_VAL bit differed depending on the used Driver Object Type. The issue has been addressed and the ALT_VAL bit behavior is now as expected. To benefit from this fix: Update your zenon Software ...