IEC870 driver over serial (101) cannot handle single control character 0xE5

• Related Articles

• The IEC61850 Server does not handle correctly some combinations of TrgOps events arising in single Data Object

  Summary The IEC61850 Server driver in zenon Logic (straton) should correctly handle all combinations of Trigger Options (TrgOps): dchg, qchg and dupd based also on each Data Attribute definition in the SCL, not only on RCB setting. In SCL-file there ...

• Communication with IEC870 driver in serial mode (101) is no longer possible to devices which do not support RTS_CONTROL_TOGGLE

  Summary Serial interface is initialized with RTS_CONTROL_TOGGLE flag Description Serial interface is initialized with RTS_CONTROL_TOGGLE flag Issue Number: 192664 Fixed on Date: 26.8.2019 Versions: 8.00 0 BUILD 60081 | 8.10 0 BUILD 60592

• Checklist: Communication to TwinCat via BeckhoffNG driver

  Time estimate: 30 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. TwinCAT ADS communication library ...

• Checklist: Driver(s) cannot establish a reliable communication

  Time estimate: 60 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...

• DNP332 driver with multiple serial stations configured stops communicating to further slaves when the first slave fails

  Summary When in the DNP332 driver multiple DNP3 slaves are configured for a single serial bus, and the connection to the first slave fails, the DNP332 driver constantly attempts to reconnect to the first slave, and no longer tries to communicate to ...