IEC850 Client driver in commands sends the time stamp with FractionOfSeconds = 0

• Related Articles

• IEC 61850 Client driver in Logic should have configuration settings BufTm, IntgPd, OptFlds like zenon iec850 driver has

  Summary zenon version 7.20 has introduced in zenon IEC61850 (client) driver new configuration settings, but not in the Client driver in straton/Logic. The driver configuration RCB settings: Buffer Time, Integrity Period and Optional Fields should be ...

• FAQ: What is the time zone and time format used in zenon Software Platform products and what needs to be considered?

  When you ask someone what the time is, they'll usually be able to tell you. But when you ask them what date and time sunrise was yesterday in a different country on a different continent, in a different hemisphere it gets less easy. Terms like GMT ...

• OPCUA Client Driver: Extension Objects "Switching Time" in "Schedule" do not work properly

  Description In the OPCUA client driver, setting a value other than 0 for "Switching Time" in "Schedule" leads to an error. All variables become invalid. These variables can be set to 0 again with another OPCUA client. They are then spontaneous again. ...

• OPC UA Driver shows a wrong time stamp in Alarm Message List screen when an Invalid Bit status occurs

  Summary OPC UA Driver shows a wrong time stamp in Alarm Message List when connection is lost in 7.60. Description OPC UA Driver shows a wrong time stamp in Alarm Message List when connection is lost in 7.60. Issue Number: 232666 Fixed on Date: ...

• Checklist: Driver(s) cannot establish a reliable communication

  Time estimate: 60 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...