IEC61850 - the runtime go to segmentation fault when we start the project using goose without K5BusIec850s_GO.SCL

• Related Articles

• straton IEC61850 Server does not start GOOSE because IdInst are empty in K5BusIec850s_GO.SCL

  Summary When the driver's configurator ( K5* ) creates from particular SCLfile the file with GOOSE reception data model - the original ldInst became part of IED name. Then the driver does not start and the straton Runtime writes error message ...

• Checklist: Engineering Studio cannot start or closes unexpectedly

  Time estimate: 30 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...

• FAQ: What can I do if the Service Engine does not start or is closed with an unhandled exception and the error message "(InitInstance (); an unnamed file has a bad format)" or "Init Instance (): an attempt was made to access an unnamed file past its end" is shown?

  This issue may occur due to missing digital certificates on the system where the error appears. Microsoft Windows implements a mechanism that automatically downloads, over the internet, trusted root certificate authorities, which are not installed ...

• Checklist: Process Gateway cannot start

  Time estimate: 30 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...

• Checklist: zenHelpService cannot start

  Time estimate: 15 minutes Please go through all the items in the following checklist. If necessary, confirm any information you cannot verify with the IT department before contacting your local COPA-DATA representative. If during the installation of ...