IEC61850 Server - SCL Editor - ctlNum BDA missing in APC types (Analog commands)

• Related Articles

• Checklist: Data Missing in Service Engine

  Time estimate: 60 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...

• SCL Editor [IEC61850-6]- the scl must not handle an error when checking a private types

  Description When importing an SCL file with Private tags into the SCL Editor for IEC61850 in zenon Logic, a syntax error is indicated. However, according to the standard, errors for Private tags should not be indicated during validation. This ...

• AccessIec870Sl: CEL entries are created for direct execute commands for T00 ASDU types

  Description The Process Gateway IEC 60870 slave no longer logs messages for internal ASDU type variables (T00) if the option "Log commands in CEL" is enabled. This behavior has been changed. To benefit from this fix: Update your zenon Software ...

• T5BusExIec850m - Client - The driver always sends Cancel with value 0 on analog comands (APC)

  Summary Cancel command for analog values doen't contain value Description Cancel command for analog values doen't contain value Issue Number: 239358 Fixed on Date: 31.3.2021 Versions: 8.20 0 BUILD 82266

• IEC61850 Server handles INT64 and INT128 data types as DINT (32-bits) and not LINT

  Summary The IEC 61850 Server handles Data Attributes of bType INT64(U) and INT128 as (U)DINT - 32 bits - data type in zenon Logic. The driver shall use the longest integer data type available in Logic - (U)LINT (64 bits). Description The IEC 61850 ...