IEC61850 Server responds on GetNameList (nammedVariable) with only full FCDA references, omiting entries about LN or LN$FC

• Related Articles

• Checklist: OPCDA Server

  Time estimate: 20 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Do NOT use DCOM in combination ...

• IEC61850 Server - valKind RO (Read Only) must also be taken in account for DA with FC = SP and SE

  Description The IEC61850 Server did not refuse written values on valKind RO (Read Only) for DA with FC = SP and FC = SE. The issue has been addressed. Now the IEC61850 Server refuses written values on valKind RO (Read Only) for DA with FC = SP and FC ...

• FAQ: What are Installation and Security considerations of the zenon Smart Server and Smart Client?

  The attached document (English only) describes in some detail the specifics of the zenon Smart Server Application and the zenon Smart Client Application. Also a short explanation of security features and components is given. More information about ...

• T5BusIec850s: Logic Service IEC 61850 server closes unexpectedly on receiving an invalid message

  Description In Logic Service, the IEC 61850 server closes unexpectedly when receiving an invalid message. This behavior has been changed. Invalid messages are now ignored. To benefit from this fix: Update your zenon Software Platform to the latest ...

• FAQ: Delayed variable updates on Terminal Server Service Engine Clients occur in some scenarios.

  In some cases, Service Engine Clients on a Terminal Server might have delayed variable updates. Depending on the system those delays can be about 2 seconds. A reason for this can be a hostname resolution procedure, which is needed to determine ...