IEC61850 Server driver has wrong reaction on MMS.Read request with the flag "SpecificationWithResult" set to TRUE

• Related Articles

• zenPG ICCP responds with malformed frame when a remote ICCP-client sends MMS.Read request with flag specificationWithResult=true.

  Summary zenon Process Gateway ICCP-TASE.2 responds with malformed frame when a remote ICCP device requests a MMS.Read with flag specificationWithResult=true. This optional flag demands that the response will contain not only values but also names of ...

• Checklist: Driver(s) cannot establish a reliable communication

  Time estimate: 60 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...

• Checklist: OPCDA Server

  Time estimate: 20 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Do NOT use DCOM in combination ...

• AllenDF1 driver: FLOAT and STRING variables show wrong values when the offset considers data type flag is active on driver configuration

  Summary In specific project configuration/offset constellation invalid Bit is set when a FLOAT variable is seen in a screen even if all offset configuration is correct. The problem occurs when in the driver configuration it is enabled the "Offset ...

• the IEC61850 driver (Client) does not act according the negotiated MMS max outstanding requests

  Summary At the beginning of IEC61850 communication, in MMS.InitiateRequest and MMS.InitiateResponce the client and server are exchanging information also about maximal number of outstanding MMS requests (typically it affects number of outstanding ...