IEC60870 Slave PG - IOA 16 internal variable not updated correctly

• Related Articles

• Process Gateway IEC870Slave is not handling correctly DPI-mapping for zenon variable configured to be more as one IOA

  Summary Issue in zenon Process Gateway IEC 60870 Slave by DPI/DCS mapping when one zenon variable is configured in a sector many times. If you create in a sector two or more IOs as 'double point information' - type id. <3>, <4> or <31> - and link ...

• Compatibility problem with Access IEC60870-5-104, can't load setting from XML

  Description After updating zenon Software Platform to a build that supports IPv6, IEC870 Master does not get a connection to IEC870 Slave in 101-Unbalanced mode.. This has been fixed. To benefit from this fix: Update your zenon Software Platform to ...

• FAQ: Initialization of Internal variables (Network) in Dominant redundancy mode.

  When (re-)starting the dominant Server 1, regardless of their 'Remanence' configuration, internal variables with calculation in 'Network' are initialized first in the dominant Server 1 and only after synchronized with the running Server 2. Modules ...

• zenon Logic Fieldbus => Hilscher cifX Profibus: Diagnose Variables (Master/Slave) are not updated properly

  Summary zenon Logic Fieldbus => Hilscher cifX Profibus: Diagnose Variables (Master/Slave) are not updated correctly. it isn't possible to check/recognize, if a slave is ok or not ok, because the SlaveState Bit is always 0! => e.g disconnect the ...

• Process Gateway IEC 60870-5-101 slave does not send a correct response when an unsupported ASDU is received

  Summary When an unsupported ASDU is received the 870 101 slave did not correctly send a link layer confirmation, causing a communication interruption Description When an unsupported ASDU is received the 870 101 slave did not correctly send a link ...