IEC60870 Slave - ASDU 20 - M_PS_NA_1 Packed Single Point Information - Is not sent on Backgroundscan cycle

• Related Articles

• IEC 60870 Slave: wrong APDU Length calculation for series of M_ME_TC_1 (T14) and M_ME_TF_1 (T36) data

  Summary issue in Stack for IEC60870 Slave - in zenon Process Gateway and in zenon Logic - when driver is used with reduced setting for 'ADPU/Data size': for IOs (variables) of Type IDs: - T14 - M_ME_TC_1 - measured value, short floating point number ...

• Process Gateway IEC 60870-5-101 slave does not send a correct response when an unsupported ASDU is received

  Summary When an unsupported ASDU is received the 870 101 slave did not correctly send a link layer confirmation, causing a communication interruption Description When an unsupported ASDU is received the 870 101 slave did not correctly send a link ...

• Compatibility problem with Access IEC60870-5-104, can't load setting from XML

  Description After updating zenon Software Platform to a build that supports IPv6, IEC870 Master does not get a connection to IEC870 Slave in 101-Unbalanced mode.. This has been fixed. To benefit from this fix: Update your zenon Software Platform to ...

• AccessIec870Sl: CEL entries are created for direct execute commands for T00 ASDU types

  Description The Process Gateway IEC 60870 slave no longer logs messages for internal ASDU type variables (T00) if the option "Log commands in CEL" is enabled. This behavior has been changed. To benefit from this fix: Update your zenon Software ...

• IEC870 driver, when sends TESTFR shortly (<10ms) after reception of spont ASDU, is not acknowledging this ASDU, and slave closes connection

  Summary IEC870 Driver discards all incoming I-Frames when waiting for "TESTFR con". Description IEC870 Driver discards all incoming I-Frames when waiting for "TESTFR con". Information probably when you deactivate the TEST-procedure (T3=0), but this ...