IEC60870-5-103 Driver - ASDU 205 read value error

• Related Articles

• Checklist: Driver(s) cannot establish a reliable communication

  Time estimate: 60 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...

• Bug: Write Error to setVal[SP] on IEC 61850 Server

  Description The IEC 61850 Server fieldbus driver accepts the write requests for read-only ('RO') data attributes (variables) with FC=SP; e.g. */setVal[SP]. And it refuses the write requests for data attributes with FC=CF, if SCL-configured as 'Set' ...

• stratonNG driver cannot read string variables

  Summary In the version 1800 of the stratonNG driver string variables cannot be read anymore. An Element from type dynamic text stays empty. In diagnosis viewer (deep debug) you can see that the driver gets the value from zenon Logic runtime, but then ...

• Checklist: zenon Driver does not start in zenon 11 Engineering Studio / Service Engine.

  Time estimate: 15 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. zenDrvOpsManager is no longer ...

• IEC62056 driver: BCC error with setting "read single registers" enabled

  Summary If the option read single registers is enabled, the communication to specific meters fail. Description If the option read single registers is enabled, the communication to specific meters fail. Solution Problem was addressed in the delaytime ...