Hostname can no longer be used with S7TCP32 instead of using the IP Address

• Related Articles

• In zenon 7.11 it should be possible to enter an ip address as well as a hostname as string for the Network Connection of the S7TCP Driver instead of having four numerical fields for the ip address as before.

  Summary When a hostname entered for the Network Connection of the S7TCP driver can`t be resolved, the given string will be interpreted as IPV4 address. DescriptionWhen a hostname entered for the Network Connection of the S7TCP driver can`t be ...

• T5BusEIPS: EtherNet/IP Adapter does not make use of TCP Keep Alive

  Description The EtherNet/IP Adapter (T5BusEIPS) does not make use of TCP keep alive messages to check if the TCP connection from an EtherNet/IP Scanner is still OK. The issue has been addressed and the T5BusEIPS enables a TCP keep alive for the ...

• When a connection with a valid hostname of the SNMPNG32 driver exists under tab SNMP Agents and then trying to replace the hostname with an ip address which corresponds to that hostname, an error message with text "The Agent configuration is invalid." appears.

  Summary When replacing the hostname of the SNMPNG32 driver under tab SNMP Agents with an ip address which corresponds to that hostname, an error message with text "The Agent configuration is invalid." appears. DescriptionWhen replacing the hostname ...

• IEC850 driver should support driver command for switching to secondary IP address.

  Summary IEC61850 (Client) driver should support driver command for switching TCP communication from the use of primary IP address to the secondary IP address (and vice versa). DescriptionIEC61850 (Client) driver should support driver command for ...

• MODBUS ENERGY: Support for RTU frames over TCP/IP

  Summary The Modbus Energy driver supports communication of RTU frame via TCP/IP. Description For this purpose, the new Modbus TCP/RTU frame via TCP radio button has been implemented in the Settings tab of the driver configuration dialog. Item ID: ...