Gantt Chart displayed in future as long as there is chart on Y axis

• Related Articles

• Extended Trend: Line Chart exceeds Y-Axis limit when another Gantt chart is active

  Summary When Gantt Bars where drawn, the curve "height" was extended with the height of the gantts and their gaps. Now the curves end always with the y-Axis. Description When Gantt Bars where drawn, the curve "height" was extended with the height of ...

• ETM - Gantt chart is invisible with standard settings

  Summary When you activate the Gantt chart in the extended trend and you leave the default setting for "Line width" (=0), then the Gantt chart isn't displayed. The problem is, that the standard setting = 0 and this setting is treated different in the ...

• Limit value display in GANTT chart in extended trend is not correct when using a reaction matrix for the limit

  Summary An incorrect value (1.797 e+308) is displayed as text in the GANTT chart in the extended trend when the variable for the GANTT chart uses a reaction matrix rather than a limit. Description An incorrect value (1.797 e+308) is displayed as text ...

• Gantt chart is sporadically disappearing/blinking

  Description In the Extended Trend, the Gantt chart does not behave according to the project design in some constellations. It disappears or flashes unexpectedly. The problem remains until the value is changed. This behavior has been corrected. The ...

• Filter settings Position "% of the width of the Y-Axis" in tab X-Axis is not configurable from -100 up to +100.

  Summary If you move down/up the X-Axis on the Diagram Window - trend display control, below/above allowed range, he will then see "message" on filter settings as long as he will not adapt it to the range 0-100. Without that, he cannot "save" ...