Fieldbus Configurations - No data sent by the 850 Server when EIP Scanner is configured but has no partner

Fieldbus Configurations - No data sent by the 850 Server when EIP Scanner is configured but has no partner

Description

The IEC61850 server did not send any data if the EIP scanner was configured correctly but did not have a partner client. 
The issue has been addressed and the behavior is now as expected. 
 
To benefit from this fix: 
  • Update your zenon Software Platform to the latest build of zenon 14 or higher. 



Item ID: 293918
Version: 14.00 Build: 358890

    • Related Articles

    • Checklist: Data Missing in Service Engine

      Time estimate: 60 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...

    • FAQ: How, where, why and when does zenon Service Engine save data?

      zenon Disk Space Handling: The zenon Service Engine, by default, stores process data on the hard disk. This is true for a standalone zenon project, as well as the zenon Service Engine server(s) in the zenon network topology. This data consists of ...

    • Checklist: OPCDA Server

      Time estimate: 20 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Do NOT use DCOM in combination ...

    • How to get the IIoT Dashboard Service running with data from the Service Engine

      With the IIoT Dashboard Service, you can create and easily edit fully responsive, web-based dashboards. This works for central usage across different production sites and facilities. In this article, you will get a guidance for what systems you need, ...

    • Interface settings for using an Ethernet port for Fieldbus communication in zenon Logic (e.g. ProfiNET)

      When using a local Ethernet interface for Fieldbus communication in zenon Logic, you have to ensure that VLAN and/or priority settings (cf. IEEE802.1Q) are deactivated in the network adapter configuration. Therefore, go to the Network controller ...