BATCH CONTROL - Adjustable cycle time for Batch Control

BATCH CONTROL - Adjustable cycle time for Batch Control

Description

[Feature]: In Batch Control the cycle time of the Recipe Execution Engine (REE) was not configurable. The functional gap has been addressed and now a cycle time can be configured in the new property Cycle time [ms]. The property is available within the Engineering Studio at service Batch Control > property node General > group Execution Engine.

 

To benefit from this fix:

  • Update your zenon Software Platform to the latest build of zenon 15 or higher.


Item ID: 312424
Version: 15.00 Build: 590591

    • Related Articles

    • GDI Leak: Batch Control Recipe Editor

      Summary Each time Batch Control Recipe Editor is opened 6 GDI objects are leaked Description Each time Batch Control Recipe Editor is opened 6 GDI objects are leaked Issue Number: 242796 Fixed on Date: 15.7.2021 Versions: 8.20 0 BUILD 86192 | 8.00 0 ...

    • Checklist: Message Control

      Time estimate: 15 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Screenshot and followed ...

    • Validating large Batch Control recipes may take very long

      Summary Validating very large and complex Batch Control recipes (e.g. with big Matrix operations in a loop) may tke an excessive amount of time. During this time the runtime can't be operated. Description Validating very large and complex Batch ...

    • Opening a Batch Control Screen may take very long if many recipes exist

      Summary When opening a Batch Control screen, properties of existing recipes are loaded in order to display this information in the list. Depending on the number of existing recipes and configuration of the screen switch function this may take a while ...

    • The Batch Control Recipe Editor opens without reipe lists even though recipe lists were activated in a previous session

      Summary When using the Batch Control Recipe Editor it is possible to configure a special layout with the three available recipe lists. This layout should be remembered and applied again, when the Batch Control screen is opened the next time. In zenon ...