ALC property 'Source for reverse feed' - IDP_DYNELE_ALC_REVSRC - demands license for Topology Module while 'Transformer' not.

ALC property 'Source for reverse feed' - IDP_DYNELE_ALC_REVSRC - demands license for Topology Module while 'Transformer' not.

Summary

The ALC property "Source for reverse feed" - IDP_DYNELE_ALC_REVSRC - is only available, with license of Topology Module (extended ALC). But the ALC element 'Transformer' is available without Topology license, e.g. in the zenon Energy Edition.

Description

The ALC property "Source for reverse feed" - IDP_DYNELE_ALC_REVSRC - is only available, with license of Topology Module (extended ALC). But the ALC element 'Transformer' is available without Topology license, e.g. in the zenon Energy Edition.

Solution

Now IDP_DYNELE_ALC_REVSRC is enabled with standard ALC license.



Issue Number: 28206
Fixed on Date: 12.12.2012
Versions: 7.00 0 BUILD 6

    • Related Articles

    • Interlocking conditions in actions are only considered with Topology Module license.

      Summary When using user-defined interlocking conditions in actions of Command Processing, the conditions are not considered with Energy Edition license. They are only working if you have licensed the Topology-Module (advanced ALC) too. ...

    • in strong meshed topology the calculation of ALC blocks Runtime

      Summary In strong meshed topology, even by bearable quantity of switches, the ALC calculation can block Runtime (CPU load 100%) for significant time. Description In strong meshed topology, even by bearable quantity of switches, the ALC calculation ...

    • Checklist: Component cannot find the license

      Time estimate: 15 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...

    • ALC source can not be deleted permanently

      Summary Error message pops up after deleting an ALC source and reopening configuration dialog without project unload/reload. Description Error message pops up after deleting an ALC source and reopening configuration dialog without project ...

    • Checklist: It is not possible to activate a license

      Time estimate: 15 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...