AccessAzure: It takes a very long time (~ 25min in a zenon project with ~ 110.000 variables) until the 'Settings' dialog is shown when clicking on the Settings" button in the Process Gateway dialog"

• Related Articles

• Checklist: Process Gateway cannot start

  Time estimate: 30 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...

• Checklist: Process Gateway cannot establish a reliable communication

  Time estimate: 45 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...

• AccessOPCUA: Takes very long time to start with Customer project

  Description In the Process Gateway, AccessOPCUA takes a long time to start in some projects. This is due to the number of variables contained in the project. All variables have been checked to see if they have been configured in the Process Gateway. ...

• Checklist: Process cannot or takes a long time to start

  Time estimate: 45 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...

• FAQ: How can I create long term Wireshark sniffs?

  In this example it will be used OPC UA protocol as example to show how to use and configure a long term Wireshark captures. This is the best option when troubleshooting a connectivity/network issue occurring sporadically and it is not possible to ...