61850 GOOSE cannot be received if several adapters are listed

• Related Articles

• GOOSE subscriber is not updating the timestamp received from the GOOSE publisher

  Summary zenon Logic I/O driver ‘IEC 61850 Server with GOOSE’ as Subscriber is not updating timestamp - the value of t-variable – when received in GOOSE message from a Publisher. In earlier builds of 7.10 and versions was OK. Descriptionzenon Logic ...

• The Ethernet IP I/O Scanner does not reconnect properly if several Adapters are connected and rebooted

  Summary In case of a network loss or Ethernet IP adapter is unpowered, it could happen in installations >3 Ethernet IP adater that some of the adapters are not reconnecting properly. Description In case of a network loss or Ethernet IP adapter is ...

• IEC61850 GOOSE Subscriber accepts messages with NdsCom set.

  Summary The zenon Logic I/O driver IEC61850 Server as GOOSE Subscriber is processing data changes received in GOOSE messages with the flag NdsCom set to TRUE. This flag means that on Publisher the GOOSE Control Block needs commissioning, so ...

• GOOSE subscriber is not able to distinguish if a publisher was never sending GOOSE or is sending without errors.

  Summary Diagnosis engineering issue in zenon Logic I/O driver 'IEC61850 Server with GOOSE': the initial value of GOOSE supervision variable (ControlObject variable = 0) is the same as value when there are no errors. Thus, if remote GOOSE Publisher ...

• IEC61850 Server: a GOOSE messages not matching the definition can cause in Subscriber an infinite loop

  Summary By reception of some incorrect GOOSE messages the zenon Logic I/O driver IEC61850 Server can go in infinite loop. Description By reception of some incorrect GOOSE messages the zenon Logic I/O driver IEC61850 Server can go in infinite loop. ...