3SV3: Variable has wrong state if Driver mode is changed to Simulation static and Screen gets switched

• Related Articles

• FAQ: What are the different zenon drivers modes?

  All Service Engine process-driven drivers can run in four different modes, mainly allowing you to switch between active hardware connection and values simulation. While "Hardware" allows establishing a connection to the target device(s) and its the ...

• SNMPNG32 driver crashes when mode gets switched in runtime

  Summary SNMPNG32 driver crashes when mode gets switched in runtime Description SNMPNG32 driver crashes when mode gets switched in runtime Issue Number: 224121 Fixed on Date: 13.8.2020 Versions: 8.10 0 BUILD 67751 | 8.20 0 BUILD 67700

• Variables of OPC2CLI32 driver get invalid when the OPC2CLI32 driver is started in Simulation - static mode and then switched to Hardware mode during runtime

  Summary When starting the OPC2CLI32 driver in mode Simulation - static and then switching to mode Hardware during runtime, the variables of the OPC2CLI32 driver become invalid. Description When starting the OPC2CLI32 driver in mode Simulation - ...

• When using a Driver in mode "Simulation - static" and in the zenon runtime the Driver command "Switch to Hardware mode" is executed, variables of the corresponding Driver get INVALID (correct) but when then executing the Driver command "Switch to Simulation mode" the variable stays INVALID but gets also SPONT.

  Summary When performing the Driver command "Switch to Hardware mode" in the zenon runtime variables of a Driver which is running in mode "Simulation - static" get INVALID (correct). When then performing the Driver command "Switch to Simulation mode" ...

• OPC UA driver communication issue when switching driver status from Simulation mode to Hardware mode while SE running

  Description The OPC-UA driver does not communicate correctly with the OPC-UA server after switching from simulation mode to hardware mode and back to simulation mode while the Service Engine is running and the OPC-UA server is not connected. ...