3S_V3 driver should support activating logging in PLChandler

3S_V3 driver should support activating logging in PLChandler

Summary

It should be possible to activate the advanced logging of the 3rd party PLCHandler within the driver settings

Description

It should be possible to activate the advanced logging of the 3rd party PLCHandler within the driver settings

Solution

The settings for the activation of the logging is added to the drivers configuration.

Information

To ensure the compatibility of the driver setting within one version, use the same build for Editor and Runtime.



Issue Number: 136316
Fixed on Date: 16.5.2018
Versions: 7.20 0 BUILD 47903 | 7.50 0 BUILD 46879 | 7.60 0 BUILD 49005 | 8.00 0 BUILD 47946

    • Related Articles

    • Checklist: Driver(s) cannot establish a reliable communication

      Time estimate: 60 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...

    • Checklist: Step-by-Step guide - How to create a remote logging

      Time estimate: 10 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. For the purpose of this ...

    • Checklist: Communication to TwinCat via BeckhoffNG driver

      Time estimate: 30 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. TwinCAT ADS communication library ...

    • Checklist: zenon Driver does not start in zenon 11 Engineering Studio / Service Engine.

      Time estimate: 15 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. In zenon 11 and newer versions, ...

    • The logging for the KUKA Driver should be enhanced.

      Summary In the diagviewer SetInfo, Cancel and OnSetInfo of the KUKA Driver will not be logged. DescriptionIn the diagviewer SetInfo, Cancel and OnSetInfo of the KUKA Driver will not be logged. Solution This issue has been addressed by adding logging ...