3S_V3 driver: If the values request from the PLC Handler takes too long, the RT will block.

3S_V3 driver: If the values request from the PLC Handler takes too long, the RT will block.

Summary

If the values request from the PLC Handler takes more than a few seconds, the RT will block and a progress bar appears.

Description

If the values request from the PLC Handler takes more than a few seconds, the RT will block and a progress bar appears.

Solution

Symbols are advised asynchronously at the PlcHandler, so the runtime is not blocked, when this lasts longer

Information




Issue Number: 33960
Fixed on Date: 13.3.2015
Versions: 7.10 0 BUILD 18400 | 7.50 0 BUILD 25796

    • Related Articles

    • FAQ: How can I create long term Wireshark sniffs?

      In this example it will be used OPC UA protocol as example to show how to use and configure a long term Wireshark captures. This is the best option when troubleshooting a connectivity/network issue occurring sporadically and it is not possible to ...

    • Checklist: Driver(s) cannot establish a reliable communication

      Time estimate: 60 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...

    • Checklist: Process cannot or takes a long time to start

      Time estimate: 45 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. Checklist usage: #. [Quick hints] ...

    • Checklist: Communication to TwinCat via BeckhoffNG driver

      Time estimate: 30 minutes Please go through all the points in the following checklist. If necessary, confirm with IT Department any information you cannot verify before contacting your local COPA-DATA Representative. TwinCAT ADS communication library ...

    • Error in 3S_V3 driver for PLC Handler configuration when the editor language is IT, FR, ES

      Summary When the editor Language is set to Italian, French or Spanish, an error in the 3S_V3 driver for PLC Handler configuration occurs. Description When the editor Language is set to Italian, French or Spanish, an error in the 3S_V3 driver for PLC ...