Recent Topics
Difference Between testBit/setBit and variable.bitNumber
Hi , Suppose that i have a word variable like xWord (which is imported from OPC server) and i want to read or set some of its bits.(in following example, xbit is an internal zenon variable which is visible in Scada Logic) What's the difference between
String Value comparison to operate the Boolean value
Hello, I am using Zenon 7.6 Please help me to compare two string values for example 'current primary server & secondary server' based on this internal Boolean value has to be changed. @condition-1 String value1 = String value2 ==> Boolean Value =1 @condition-2
Time Interval for Trending
Hi, does anyone know how to configure in order to have a button besides Trending Graphs that can be used to change the time interval of the graph. I'm know there is a filter function which can edit variables, time and etc but I'm want a simplify function
Beckhoff(v2.11 & v3.1) <> Zenon(v6.51 & v8.0) communication
Hello Zenon Forum, We’ve got a specific problem and we hope someone can help us. A client of us has a running Zenon system, this includes several runtime stations who are connected to there own CPU in the field. The system is built up like a tree: 1
Reset Data on a Preset Period
Hi, I have a meter used to measure the maximum demand of active power at the interval of 30 minutes and created a historian for it. Is it possible to record it throughout one month and reset the value at the end of the month automatically? Ep. Historian
How to display the last 5 measurements of the variable?
Hello, How could I display the 5 last measurements of the variable? I have five numeric values fields in the Editor, two kinds of archive for it - on change and cyclic. Thanks in advance for your help! Best regards, Łukasz This is a migrated post! Originally
Windows 10 und WebClient Aufschalteverzögerungen
Hallo, ich habe eine kurze Frage. Gibt es Informationen ob aktuelle Windows 10 x64 Pro Versionen (Build 17763) Probleme mit Zenon 7.60 WebClient hat ? Wir haben für einen Arbeitsplatz einen neuen PC bekommen (i3-7100U mit SSD und Windows 10). Das Windows
Cursor and timestamp in extended trend
Hi, I’m interested in how the timestamping on x-axis (abscissa) in an extended trend works. Does the timestamp of a following measured value change if there is no change of the measured value? I archive my data every 15 minutes. So when there is no
zenLogSrv aus AddIn benutzen (eigenen Log-Eintrag schreiben)
is it possible to write a customer log entry into the zenon log system ( :( This is a migrated post! Originally posted on 29.04.2019 by user its_me. Please be aware that information can be outdated.
About Zenon archive
is it possible to store zenon archive in another drive and runtime folder in another drive ? if yes let me know the procedure. This is a migrated post! Originally posted on 27.04.2019 by user gadre14. Please be aware that information can be outdated.
IEC60870-5-104 Settings for redundancy with Sicam AK3
Hello I have one standalone Zenon runtime PC, Communication via IEC60870-5-104 with one redundant Sicam AK3 system, (consisting of tho AK3 with internal voter logic). My settings on the Zenon driver are these: Redundancy according to Edition 2.0. Communication
Straton/ModbusTCP driver - How to set parameters?
Hello. I'm trying to set a tcp port and ip address in a modbus tcp slave driver. In the driver configuration are not fields. This is a migrated post! Originally posted on 26.04.2019 by user mhanusek. Please be aware that information can be outdated.
Problem Facing on HTML5
Hi Folks, Am doing small project In that i have Development PC and Webserver Also i need to publish the data through Webserver only, Can anyone please guide me how to do that. And one more thing i just tried with Development PC but its shows Errors in
Create recipe by function and modify the new recipe in C#
Hi, I would like to create a recipe using a function and edit it in C# right after creating it. Creating the recipe by function works using the following command: C# Code: this.RtFunctions().Item("Function_Recipe_Offline_Save_As").Start(); Modifying an
Webclient, Extended trend, is it possible to save personal filters without export import
Hi! We use Zenon 7.60 with a webserver on the top project. we have 5 zenon runtime installations under the top project. (5 individual machines) In the extended trend. Is there a way to automatically save your personal filters without export import functions?
Customized screen arrangement
Hi, Customer is asking me to configure a Customized screen arrangement for each user. It means, when User 1 log in, he could see the screen in a predefined order (for example: process display in the right and events in the left), but when User 2 log in,
Align Static Text on Screen
I create static text dynamically on screen with command: Dim obProject as Project Set obProject = MyWorkspace.ActiveDocument Dim obPicture as DynPicture Set obPicture = obProject.DynPicture.Item(0) Dim newElement as Element Set newElement = obPicture.Elements.Create("new_text",
Zenon supervisor
Error: File "password.cmp" has version number 0.00 SPO- but the project has version number 7.00 SP0. This is a migrated post! Originally posted on 19.04.2019 by user Otmane2019. Please be aware that information can be outdated.
problems with zenon logic
hi' i have a problem in one project: when i start the zenon runtime an error of "initializing the SCADA logic runtime faild" comes on. this cause problems in graphs and other functions in the run time. the same project in other computer works fine. what
Zenon Runtime connected to multiple PLCs
Dear All, I would like to ask about network settings. Our Zenon application will communicate with multiple PLCs on the field (Beckhoff PLCs) But these PLCs are not on the same network, not in the same IP range. Therefor we have multiple network adapters
Demo License not working
I have installed zenon-08 on server-16 but it is not working in demo mode. please guide me over same. same is working on previous installation. This is a migrated post! Originally posted on 24.04.2019 by user gadre14. Please be aware that information
Backfill Trend data using DNP3
Hi guys I am using Zenon Supervisor as a central SCADA monitoring @ 400 RTUs that send data on DNP3 protocol, over GPRS modems. The requirement is that whenever the communication link fails, the data must be logged in the RTU. We are using Sixnet RTUs
Openning Logic project in Editor Using Macros
Hi, I just done all VSTA/VBA training and interested in which. but I am not good at programming skills. I often use Zenon Logic project in the practical project. So, I wonder I could open another Zenon project's Zenon Logic project and see My previous
Zenon Operator freeze
Hello after installation of windows OS updates the Zenon Operator start to freeze without any visible reason close the application and reopen again solve the problem for couple of hours but it's came back after some time please help to find windows KB
Reg: In Report particular cell value is corrupted
Hi Team, Report value got corrupted at particular cell value, Refer to the image attached, particularly in second row and frequency column we are seeing this corrupted value. Please look into it and support. Regards Sarav This is a migrated post! Originally
Problem with ReMa, 61850 Report communication and delay time
Hello, I have a problem with delay in reaction matrix in zenon energy 8.00. I'm using a 61850 driver with Report Enable (All my data points are tagged with COT0, COT1 ). I configured a Binary Rema with a short delay (5s) to create a new entry in alarm
Historian architecture
Hi Support, We are developing a SCADA to monitoring and control 8 electrical substations and power plants. Customer are asking for this configuration: 02 Servers + 02 Clients + 02 Historian (redundant) in 6 different industrial computers. For this we
file format supported in 3d configurator
hi everyone, I want to know What 3D file formats does zenon support(can be inported into 3D configurator) and the maximum file size supported for each format? thanks for your time This is a migrated post! Originally posted on 15.04.2019 by user alfaexec.
Alarm Offline Print
Hi, I have configured Alar_G.frm file as per online help and added in the Files--> Texts and Formats. When I was tried to give print then Alarms columns are similar to each other rows. I have attached here Alarm printed page & configuration files. Please
Individual Variable Alarm Acknowledge from Standard Screentype using Single Function
Hi, Is it possible to acknowledge each and every variable alarm individually from standard type screen (From Annunciation touch screen display). I have created the button to acknowledge area vise. But customer requires individual variable acknowledgment.
Variable bei Erstellung in Rezept einfügen
Danke P.S.: Ich verwende den Rezeptgruppenmanager This is a migrated post! Originally posted on 10.04.2019 by user wenzm. Please be aware that information can be outdated.
Opc ae
Is it possible to connect Zenon with OPC AE by using OPC UA? This is a migrated post! Originally posted on 09.04.2019 by user JohnBar. Please be aware that information can be outdated.
object oriented programming abb Zenon
is there a way to work with objects in Zenon? i can make templates but when you make a change in the template the screens using that template dont change. This is a migrated post! Originally posted on 09.04.2019 by user JohnBar. Please be aware that information
Zenon Data Event Alarm History Clear
Hello I want to known which foder Zenon contains History event and alarm data stored in PC Can I remove or clear it Thank you This is a migrated post! Originally posted on 06.04.2019 by user gunhunter. Please be aware that information can be outdate
ActiveX component can't create object
Hello So W10 64b / Zenon 7.20 32b I get this error when I run a VBA wizard. Have registered the OCX files and the standard program but no joy Any ideas please? This is a migrated post! Originally posted on 05.04.2019 by user lss. Please be aware that
Reg: Report value corrupted in particular cell
Hi Team, Report value got corrupted at particular cell value, Refer to the image attached, particularly in second row and frequency column we are seeing this corrupted value. Please look into it and support. Thanks & Regards Sarav This is a migrated post!
CEL doesn't record events when loss of connection to RTU
Hello, I've had some problems with getting events from an RTU when the RTU loses connection. The connected RTU stores the change of events when it looses connection to it's OPC gateway, zenon connects to the OPC gateway as an OPC DA client and reads the
geographic information system in Zenon
hello support, I need to use kMZ files but I do not know if the Zenon has the GIS functionality. Please indicate if it is possible to make such an implementation and how you could do it. regards This is a migrated post! Originally posted on 29.03.2019
Report Generator
Hi Team, As you can see from the attached screen-shot, the archive date is repeating in some of the adjoining cells to the right in Runtime. When I checked in the editor, the cells were empty and the font was also set to white. The formula used for the
Report Generator
Hi In few of my PC's I can find Report Generator but few of my PC's dont show that in the Editor. What is the Problem?? :-/ This is a migrated post! Originally posted on 28.03.2019 by user Praveen Kumar Karthikeyan. Please be aware that information can
Next Page