How to to read the Zenon variable through Process Gateway ( Zenon OPC UA Server) with using C#.Net
Hi Currently, i'm on exploring to use Zenon Process Gateway for read the variable with using C#. It Zenon/Copadata have provide the .dll file or SDK or any sample for read/write the variable with using C#? ThankYou in advance.
How to Connect to Zenon runtime present on remote PC using C# .NET?
PC1 has Zenon runtime installed ,PC2 has application written in C# .NET . Application wants to connect to Zenon runtime SCADA present on remote system and fetch Project, variables . How programatically(C#.NET) I can connect to zenon runtime on remote
WIBU License in case of RunTime Migration
We have a Runtime in Zenon 6.51 (project also available). We would like to migrate the project to 7.50 and also upgrade the Zenon Runtime to 7.50. Will we be able to reuse our WIBU key ? If yes, are there some tutorials available for this type of migration.
Server Redundancy Issue
Hi, this has been asked previously but there was no reply... I have 2 Redundant Servers and I configured it in client-server mode... My selection in Redundancy Setting is Software Redundancy. Redundancy mode is Non-Dominant. If server 1 (which is primary
Zenon Runtime error
I am using IEC850 driver in Zenon 7.11 to communicate with a SEL IED. After starting the Runtime it is always reported a message "zenNetSrv.exe: Module could not be loaded! (Last error 0x00000000) ". Once I uncheck "Network Active" option then its working
How to monitor status of client PCs ( offline or online ) from a server runtime
Hello, I am aware of system variables that can show the status of the primary servers and secondary servers. However, how can I monitor the status of client PCs? I am trying to make a system page where I can monitor all the online and offline status of
Voip message control with PBX
Is Zenon engineer service to perform VoIP PBX? 1. Reject/Answer call via zenon button 2. Make call zenon button This is a migrated post! Originally posted on 11.11.2021 by user mok. Please be aware that information can be outdated.
network configuration
HI COPA-DATA team I have question's about Zenon network connection, for example, if we have two pc in the same network based on DCOM, we installed in pc one OPC server (we use codesys OPC and name pc1) then in another pc (pc 2) we have Zenon, now my first
Server Redundancy
I'm keen to find out if we can have 4 servers backing up in pairs of each other. The basic one is that we have one + one = two servers. But I.e. in location 1 we have 2 servers working as Active + Standby for the entire rail way system. While in another
Unable to read PLC Variable in Client
Hi, I can get the value of the PLC variable in client only if I press refresh now in variable diagnosis screen. May I know how to resolve this? Thanks in advance. This is a migrated post! Originally posted on 30.12.2020 by user Soundarya. Please be aware
Runtime auto-close function
Dear Gents, Could you please advise. Sometimes Primary Server losing connection with the PLC and this is not a reason for redundancy changeover. Because of mentioned issue SCADA is stuck. If Runtime will be closed on Primary Server another one which is
Message Control - SMTP Gmail does not work
Hello, We are trying to configure the Message Control service in Zenon to send alerts. We are using Zenon 8.0 SP0 in demo mode. We have created a Gmail email address and configured Message Control with the following settings (see screenshot 1). Checking
Prevent function from running on webclient
Hi I have a standalone zenon project, runtime & webserver running on same pc, on startup I have a script executing, how can I prevent this script from executing when webclient connects? It should only execute when starting zenonruntime, not when webclient
Zenon network - bandwidth requirements
Afternoon, Has there been any testing to determine the bandwidth requirements for Zenon network? I.e. what is the minimum required connection speed between 2 servers or a server and a client? Any maximum on latency? We are considering a network which
Error message in Zenon Runtime when reading data
Hello everyone. When I want to read or store data in the runtime in client computer the next error appear in the runtime: DB file. The data could not be read completely!. Enter a smaller time range!. When I execute the same action in my own PC all is
Remote Transport - stop /start not working
Hi, I have a system where the remote transport is acting strangely... The 'transfer runtime files' is working fine, however the 'start / stop' runtime doesnt appear to do anything on the cleint (Although no error is logged on the server). If I manually
zenon network migration
Can Zenon network be useful for online virtual machine? Can it be integrated with other cloud hosted servers? I am looking to integrate my Zenon network with Office 365 cloud migration, Is it possible? Can anyone here help me. Regards, Lewis This is a
Bedienfreigabe nach Timeout ablehnen
Hallo. Ich habe ein Problem miteinem Zenon 7.10 Projekt mit 2 Redundanten Rechnern und Bedienfreigabe. Aktuell ist dies über die Standarteinstellungen geregelt. Nach Ende des Timeout erhält der anfragende Rechner also die Freigabe. Der Kunde möchte nun
Zenon Notifier App
Hi, I have configured zenon message control and I can receive the SMS in my phone. However, it shows in the standard SMS instead in the apps. Does anyone know why it wont shows in the Zenon Notifier App? Thanks This is a migrated post! Originally posted
Zenon RT Services won't start on Standby Server
Hi , We arranged a simple network topology : 2 Servers(A primary and a secondary/Standby Server) and one client(that will act as an engineering system too). When we try to connect remotely to servers and start runtime project on them, everything goes
Network issue
Hello team, Has anyone faced an issue where the network traffic is affected because of Zenon Energy edition 7.6? I have a small network with 10-15 devices and 2 switches. There is some significant lag in the network. The switch configuration seems to
Zenon Server-Client RT Licensing
Hi, Can someone please explain which licenses are needed for this configuration: 1x Primary Server (Historian, Ex-Trending, Message Control, Report Generator...) 1x Secondary Server (redundancy to Primary Server) 2x Client RT I know that the primary and
Notifier APP
Is there a way to change the Alarm Sound for incoming SMS? This is a migrated post! Originally posted on 24.08.2017 by user cermakbenjamin. Please be aware that information can be outdated.
Message control
hello; we have a project where we have to use message control module option in order to send messages (alams) via SMS using GSM modem . I'm looking for any reference ( demo project) where this solution was used with examples, because we never used this
About Runtime License
Dear friends, If I have a Zenon Energy Server License installed in a computer and I connect a monitor to it, i can see the HMI (in local mode), because server license already includes runtime license inside. That is right? or we need to buy also a Client
message control : notification message in cel
hello; I'm using message control in a project and a noticed when message control is deactivated and when alarm which is configured to be sent as a message (sms..) the message "it was tried to send a message although message control is deactivated". is
ZEN 7.20 b 23281 2 machines same plc same IP suggestion to not freak out?
This is my first post, so, we are using dual LAN panel, win 7, same static IP on LAN 1 and DHCP on LAN 2, and we have the same machine with the same PLC and IP. LAN 2 is used in DHCP for remote assistance via VPN, the machines are connected to a consumer
Interface to KNX device
HI-. I'm Engineer of south Korea. I will supply to IKEA (furniture) 2nd Shop to KNX lighting control. Use the Zenon 7.60. So, I do test it. But I have a problem. Urgent problem and issue. How can I get the KNX db(data base) file in KNX ETS5 or 4? am I
Server change over not correct.
I hope someone can help me with this strange problem. I have 6 PCs each running Zenon. There is Server 1, Server 2 and 4 clients. Each client runs a different program and the primary server communicates with the PLCs. All projects are set up as Server
webclient hat nur weißes Bild
Hallo zusammen, hat hier jemand eine Idee, was einen sozusagen "gerade eben noch" funktionierenden webclient dazu bringen kann, "von jetzt auf gleich" beim neuen Aufruf nur noch ein leeres Fenster im Internet Explorer zu öffnen? Es folgt keine Fehlermeldung,
Network - Mutli servers and Mutli Clients
Hello everyone. Here's my question. Hi have two single projects on the same plant with two PCs. Each one running one project. I'd like to display variables values of each runtime on each other one. If I say right to do so, I need to define one of the
Sicam230 Stand by Server errors
Dear Gents, During the update i faced with a problem. As usual i`ve used reload function for applying of the changes on the Stand-by server (small modification has been done on the Primary server). During the reloading of the project Stand-by server broke
Tested modems
I made a new list of tested modems, see png file. This is a migrated post! Originally posted on 28.07.2016 by user smetovic. Please be aware that information can be outdated.
WebClient 7.20 error
Hi All, Regarding of the Web Server, using Zenon 7.20 , Web server pro light, when start the web client pc, it has an error which is HTTP Error 503. Also the same thing happens when start web client in webserver pc. static ip webclient (192.168.0.17)
Web server client, blue dots when connected via internet
Hi all, I have setup web server pro light and the global_vars.js settings. The web server and zenon 7,50 runtime are on the same PC so both runtime server name and web server name are the same in the global_vars.js this setup works over the internal LAN
webclients funktionieren nicht mehr nach Windows-Update
Hallo zusammen, hatte gerade zuerst eine Art "deja-vu", da ich im März schon mal ein ähnliches Anliegen hatte. (Das sich damals quasi "von selbst" erledigt hatte.) Nur ist es dieses Mal andersrum: der Webserver meldet sich "ganz normal" in Betrieb, aber
Testing a redundancy set up
I was hoping someone could help me further understand something. I was told that simply pulling an Ethernet cable to force a communication error, and watch the back up system switch on was the wrong way to do this. Instead to power down the primary server.
Webserver tut nicht mehr nach Windows-Update
Hallo zusammen, nachdem unser Server (Windows 2008 Server R2) einen Berg von Windows-Updates über sich ergehen lassen musste, funktionieren jetzt die webclients nicht mehr! Der Web Server meldet "is running", aber im DiagViewer steht der Eintrag: "NetSrv
webclient_IE_multiplescreens automatisch starten
Hallo zusammen, habe mir das webclient_IE_multiplescreens - Tool heruntergeladen und war zunächst hocherfreut, wie leicht das funktioniert. :) Jetzt ergibt sich aber ein Folgeproblem: wie startet man das Ding per Autostart und/oder Desktop-Verknüpfung,
Sending SMS and EMAIL together.
Hello. I use MessageControl in Zenon 6.51. Now I want to send alarm message by SMS and EMAIL when variable value out of limits. I bundle functions of sending messages by mail and sms in one script and attach function of run script in the limit's field.
Next Page