Font size in Project Manager view
The size of the font used to display the Project hierarchy in the Project Manager has suddenly gone so small we cannot read it, all other views in Supervisor are showing normal sized fonts. Is there a System setting or .INI file we can edit to enlarge
WPF Error during loading XAML file
Hi! Sorry, if this topic is not in the appropriate section. I am trying to create a WPF element according to WPF manual (point 5, page 23). I have already created a XAML file with no code behind and a .dll, then imported them into zenon (respectively
Setpoint Tracking and Alarms
I would like to create an alarm by comparing two variables. One variable is a setpoint and the other is the measured value. Whe the two variables are not equal to each other, an alarm should be triggered. The multi-numeric reaction matrix I thought would
Zenon worldview screen move center
Hi forum, I am asking too much questions nowadays, sorry for that. For large size screens, ı am using move center function to show whole screen elements on screen switch buttons. I notice that when I click on the screen switch buttons, first it ıs showing
Combined element problem
Hi dear experts, In zenon I am using adp driver for redundancy. On the first initialization of zenon, adp driver cant take datas from field drivers (Iec101). So the combined elements are invisible during this stage. In combined element there is a default
Errors logged for zenNetsrv
Hi all, in a network project, when the PC client has logged several errors for zenNetsrv it is possibile to increase the Network timeout settings in zenon.in, or it not solve the problem? now there are these default settings: [Netz] TIMESYNCH =0 USE_ENCRYPTION=0
Communication Details of IEC60870-5-101
Hi dear experts, For IEC-101 driver, I need to show communication status of devices. At zenon editor creating new variable, there is option for plc marker or communication details. I have created variables from predefined variables for communication details,
Polar chart in zenon
Hi! Do you have any tips or tricks to create a polar chart in zenon? Thanks in advance. Best regards, Grzegorz Kaczmarczyk This is a migrated post! Originally posted on 30.03.2020 by user grzegorz_kaczmarczyk. Please be aware that information can be
Maximum or minimum value of a variable from 2 hour time period
Greetings! I would like to know, how to obtain the maximum or minimum value of a variable from a 2 hour time period. Now I know, that I should probably use the historian to archive the values and set the saving time period for 2 hours. I will be registering
Import variable that is linked to an "equipment modeling"
When I export a variable that is linked to an "equipment modeling" and then import it again without any modification, this link is lost and I have to do it again, there is some way that when I import it, the "equipment modeling" will not be lost. " This
Abfrage über REST-API
Hallo Zusammen, gibt es eine Möglichkeit eine Abfrage über die REST-API anzustoßen und die Antwort dann in eine Variable zu schreiben? Danke. Gruß This is a migrated post! Originally posted on 31.03.2020 by user wenzm. Please be aware that information
BUG: Help button pos wrong
Hello, just a small bugreport: Zenon Operator editor Version 8.10 SP0 Build57250 64Bit. - Importing variables with an xml file > open > confirm with ok - Resize window -> button will stay at the same position. best, Raphael This is a migrated post! Originally
Grenzwerttext in Variable kopieren
Hallo, in meinem Projekt wird der Grenzwerttext einer Variablen durch eine Reaktionsmatrix erzeugt. Dieser Grenzwerttext muss in eine andere Variable kopiert werden. Das Ganze natürlich bei jeder „nderung des Grenzwertes. Wie kann ich so etwas projektieren?
Move zenon project from one PC to another
Hello, I have zenon 7.50 installed in one PC and have a hard dongle license. I created a project in that PC. I moved the license dongle to another PC, can i also move my project from the previous PC to the new one ? and how can i do that? Thank you in
Templates.cmp
Hi! When opening a zenon runtime, this error appears: Error: File "-templates.cmp" has version number 8.00 SPO- but the project has version number 5.21 SP2. Closing the error window multiple times and reopening the scada runtime deletes the error. This
Elements in Variables & Functions Modules cannot be added/modified in a Multi-user project
Hello, I set up a Multi-user project in a local server. afterwards I accessed this projects through 3 other client computers. Two of these clients are able to edit this project normally. The third client however cannot add/modify Elements in Variables
Symbol library encryption
Hi Dear experts, I don't want to share my symbol library to clients. I searched the posts and couldn't find the answer, it is possible or not to lock symbol library. Thanks, This is a migrated post! Originally posted on 13.03.2020 by user konsistek. Please
archive timing
Dear Team, i need to know if its possible to start archiving from 5AM every day. i need to do daily report with this archiving and the report will be generated at 5:01 AM so when i put in the archive settings (start of archiving) at 5 AM it will do it
ETM changing displaying period
Dear, Is there some possibility to change trend time period according variables? On ETM screen I put some variables: year, month, day, hour, minute for start and year, month, day, hour and minute for end. I use this variables for other purposes. Is there
AML in SQL exportieren
Folgende Situation. Alle Alarme welche in der Zenon-RT dem Benutzer in der Alarmmeldeliste angezeigt werden können, sollen ebenfalls im Zenon-Analyzer zur Verfügung stehen. Dazu verwenden wir die Funktion AML exportieren mit folgenden Parametern: - Exportformat
Unable to change Double tap reaction for Alarm message List
I want to change Double tab reaction from Acknowledge to no reaction . I checked the solution in the below link, but I am not able to change it because double tap reaction is inactive ( check attached photo) https://forum.copadata.com/showthread.php?3716-AlarmMessageList-be-impossible-Double-click&highlight=Double+Tap
Demo License Key Issue in 8.10
Hello, While importing DEMO810_Scada_Energy_Edition.WibuCM license file in codemeter control center from setup it is showing error as shown in screenshot Attachment-01. In present license it is showing nothing in License Manager window as shown in screenshot
Zenon connect to two device. and interconnection to variable two devices.
I use ZENON Operator. Connect the two device. One is WAGO PLC, onother is KNX devices. WAGO PLC use the MODBUS TCP/IP, KNX use KNX TP1. Question 1. Can WAGO PLC use the KNX variable? 2.Can Zenon use the script function to move data from KNX variables
Subreports in Report Viewer
Hello, I'm currently using Visual Studio for report viewer. In trying to create a very long report definition file, I ran into a problem which restricts the report body height to be limited at 1155.6 cm. I then looked into including multiple subreports
Function execution on primary server initiated on client
Dear, I noticed that after reloading project on server, I can't execute function on client PC (Project is in Zenon Supervisor Version 8.00 SP0 Build53129, client is in Operator 8.00), but when I execute function first time on primary server after that
Retrive transient, sag &swell data from PEM575 using RS485 Cable
Hi, does anyone has experienced to retrieve transient ,voltage sag and swell data from PEM575 using RS485 cables based on waveform data structure in its manual without using gateway? Besides, does anyone have archive 1 second data for voltage and current?
Bilddateien ohne Remote-Transport übertragen
Hallo, ist es möglich einzelne Bilddateien (.ZPP) per Windows-Kopierbefehl vom Programmiergerät auf den Runtime-PC zu übertragen? Oder sind die Bilder irgendwie/irgendwo indiziert und somit nach einem Kopieren invalid? Danke und Grüsse This is a migrated
Export alarms/events with filter
Hi all. I have two questions: 1. How to make Export function which will use already filtered data from Alarm List or Event list? We have screen which already have alarm list and filter criteria on top. So we want to use that filter to export data (on
zenon 7.50 licensing with hard dongle
Hello, I have an ABB license for zenon operator 7.50 and i want to use it with a usb dongle. I activated the dm key on the automation builder side but i cant activate the zenon. When i use the serial number and hard dongle activation number in zenon editor
Variable value change logging in CEL combined with other values
Dear, I need to log variable value changing with few extra texts. User need to enter start and end date and then enter some value of volume. When user manually changes value of volume then i need to record entered start and end date. Its 11 variables
RT user32.dll error
Hi All! After a windows crash the Zenon Runtime starts with the error message: "The procedure entry point PackTouchHitTestingProximityEvaulation could not be located in the dynamic link library USER32.dll" I re-installed the zenon softwares and made a
Lookup function in Report
Hello Team, I want to use two datasets in my single table just like primary and foreign key's. And to do that Lookup is the best option in SSRS and Report builder but when i'm trying to do that there is no Lookup function mentioned in Miscellaneous Option.
zenon Software Platform Help now available online
We are very pleased to announce that the help for the zenon Software Platform is now available online. From now on, the entire zenon Help for version 10 is available at: https://onlinehelp.copadata.com In this online help you will find support for: Service
Allocation is not following the trigger variable status
Hello, I created an Allocation to allocate the value of a source variable to a target variable. this allocation is to be triggered by a binary trigger variable which toggles every 5 seconds. However, the target variable's value is changing as soon as
How to assign a certain entry in an archive to a variable?
Hello, I have an archive for a certain variable, is it possible to creat a variable that reads and holds the value of a certain entry in the archive? (for example, the variable should hold the value of the most recent entry in the archive). I am using
Projektmanager im Editor "verschwunden"
Hallo zusammen, uns ist es gelungen, auf einem PC im Editor den Projektmanager so zu verstecken, dass er unauffindbar ist! Sprich: auch wenn unter "Ansicht" der Projektmanager ausgewählt wird, tut sich nichts sichtbares. Es handelt sich um einen PC mit
automatic export
Dear team, how to make export report outomaticlly every day at fix time?? This is a migrated post! Originally posted on 11.02.2020 by user mahmood. Please be aware that information can be outdated.
Problem with the license
I had a licensed version of Runtime installed on my computer, but after windows 10 was restored, everything was gone. Whether the license can be restored. Why the license doesn 't work after the system is restored This is a migrated post! Originally posted
einchecken von Bildern funktioniert nicht mehr
Hallo zusammen, letzten Freitag wollte Microsoft ein Update für den SQL Server 2012 durchführen. Während dieses durchgeführt wurde, war auf dem Rechner ein Mehrbenutzer-Projekt, das dort im Servermodus installiert ist, geöffnet und darin waren die Bilder
Runtime set height screen
Hello, I need to change my screen size (height) according to the number of elements that I want to show. My first try was this script: Dim scrAll As DynPicture Set scrAll = thisProject.DynPictures.Item("mainAlarmActiveDetails") scrAll.UseTemplateSize
Next Page