How to define register address dynamically?
Hello everyone, I have to read event buffer from one device. It would be hell of a work to define all of the registers from buffer - so I wanted to define only 5 variables, all of the rest is the same. I mean, I have 500 registers - every event has one
Checksumme
Hallo, ich muss in der Logic zu einem bestimmten Zeitpunkt einen String aus mehreren Werten zusammensetzen. Am Ende muss die CRC-Checksumme der Werte angehängt werden. Gibt für das Berechnen Checksumme einen fertigen Baustein? Gruß This is a migrated
PID revers operation
Hi, How do I use Zenon logic PID in revers mode? Anyone know.. I'm am experienced as PLS programmer, but are new with Zenon logic. Sven This is a migrated post! Originally posted on 01.11.2015 by user spn. Please be aware that information can be out
Exposing Zenon Logic variables to be accessed via MODBUS TCP/IP
Hello, I'd like to know if there is a way how to expose Zenon Logic variables to be used accessed (read/write) from another point in network via TCP/IP (MODBUS protocol). What I'm trying to achieve is to write information to Zenon Logic from my HMI panel.
Changing Variable Name in Zenon Logic
Hello, I am using Zenon Variables in Zenon Logic. I wrote some Programs using those Variables by dragging and dropping them and every thing is working. The only problem is when a Variable name changes in Zenon it also changes in the Variable declaration
Recieving Goose on Raspberry Pi (Straton)
Hi, I am trying to configure my straton running on Raspberry Pi to recieve goose. however, I get the following error (see attached file). However, i dont know why it says "MMS", since I am using Goose. Anyone got a clue? Best, Jonas This is a migrated
variables external use
Hi support I changed driver mode to ''simulation - programed" and created simulation project. Ofter that I wrote some logic in ST and in runtime it worked OK. but I want to use variables form another driver. I enabled "externally visible" for those variables
zenon logic
Hello all, I'm new in zenon logic and I have some tasks to solve. we are going to make simulation project in zenon logic for substation operators training. So the project must satisfy these requirements. 1. when I send command, logic should response and
Calling different programs in Zenon Logic
Hey there everyone! I would like to write program with some functionalities which will be helpful in our company. It will be the same blocks, but with different parameters - is it possible to use 1 scheme like sub-program and just pass parameters from
Direktkommunikation zur ControlLogix
Hallo zusammen, Ich möchte gerne mit straton über eine Ethernet/IP Verbindung zu einer ControlLogix L72 kommunizieren. Hat jemand eine Beschreibung was alles in straton und auf Logix Seite einzustellen ist? Gruss, Patrick This is a migrated post! Originally
example useing JS_DEADTIME
I am trying to do a simple analog simulation for a PID loop. I want the output to lag the input in a first order lag response. I wrote the following code in a UDFB when call the FB from a main program it did not react as I expected. Do I need to use JS_LEADLAG
IEC 61850 to send variables from SCADA to ZENON
Hi, I managed to pull variable values from Straton to Zenon SCADA with IEC 61850 but I would also want to send values from Zenon SCADA to Straton with IEC61850. Is this possible in some way? Best, Jonas This is a migrated post! Originally posted on 25.02.2015
IEC 61850 to send variables from SCADA to ZENON
Hi, I managed to pull variable values from Straton to Zenon SCADA with IEC 61850 but I would also want to send values from Zenon SCADA to Straton with IEC61850. Is this possible in some way? Best, Jonas This is a migrated post! Originally posted on 25.02.2015
How to use Zenon Logic with RTU & also with SCADA at the same time.
Hi guys.. Now that the PCE engine for scripting is being discontinued, we are told to use Zenon-Logic for the purpose of implementing interlocks or functions that affect the behaviour of variables. In this regard I have a question. I am using a Brodersen
Referencing Project variables in the PCE
Hi friends, I have a runtime license for Zenon 7.0. In a trial application I tried to see the working of the PCE. A simple project was created having 3 internal tags ' UG_lev' (LReal), 'Inlet_XV '(Bool) and 'Pump' (Bool). The Tank level will have to increase
Communication Error
Hey guys, I'm having a problem with my wireless connection between the pc and the ev3, every 2 or 3 sec there is a communication error, and that makes it very hard to control e whatch my variables, because they keep blinking e stopping the response. Thanks.
Beckhoff Twin Cat NG Treiber nicht ausführbar
Hallo, wenn ich im Zenon Supervisor 7.11 (64Bit) den Treiber Beckhoff TwinCt NG Treiber in meinem Projekt hinzufügen möchte, passiert gar nichts. Es wird weder ein Konfigurationsmenü, noch irgendetwas anderes angezeigt. Nach kurzer Wartezeit, indem Zenon
PCE stopped working after license was installed
Hi, I have some scripts programmed in PCE and they were working fine in Demo mode. As soon as i put license numbers and activation code. Visual basic scripts made in PCE stopped working. All other stuff seems to be working without any problem. Is it wrong
Straton i2c
Hallo, für unser Projekt haben wir einen Raspberry Pi mit Straton als Software. Wobei wir Sensoren über I2C einlesen wollen. Auf dem Raspberry Pi wurde I2C installiert und der Slave wurde auch erkannt, soweit funktioniert es. Nur wir finden keine I2C
Alarmstatuszeile
Moin, wie kann ich die Alarmstatuszeile in "blau" darstellen? œberall steht, dass es geht, aber nicht wie! Kann mir da jemand weiterhelfen bitte? MfG Robert This is a migrated post! Originally posted on 11.11.2014 by user robs. Please be aware that information
Rread and Write XML files
good morning, Has anyone used the XML functions? I have to read, in SoftPLC some configuration in XML File. can you help me? Thanks a lot! This is a migrated post! Originally posted on 15.10.2014 by user tmagri. Please be aware that information can be
Missing Motors in FieldbusKonfig of zenon logic for EV3
By adding the EV3 Controller, i did not get the drive ports! This is how the config tree looks like: LEGO EV3 - EV3 - Buttons - Sensoren - Port 0 .. 3 There are no drive ports!!! When i add the NXT Controller, it looks like this: LEGO Mindstorm NXT 2.0
Re: zenon logic doesn't communicate with external variables in zenon
Hi, I am using zenon to communicate with Beckhoff PLC. I am able to communicate plc driver variables between the two. Can you please advise me how zenon system variables can be communicated to the PLC. Many thanks in advance! This is a migrated post!
Hmi
Hello How can I do a HMI for the EV3? I have done some programs in Zenon Logic and I've also done a HMI with Zenon Editor. But I have some Buttons in the Editor and I don't know how I can give them a Function. Thank you and best regards arueger This is
Connection Straton<-->Zenon
Hi, we have a problem. We established wireless communication between Straton and Lego EV3. Now we want to show changing Straton variables in Zenon environment. We connected some variables to Zenon objects on Screen but if we run Straton and then run Zenon
Connection to zenon
hello, how i connect the EV3 to zenon witthout be trought wifi, i dont have the dongle. thanks This is a migrated post! Originally posted on 01.08.2014 by user churras. Please be aware that information can be outdated.
Functionalities of ALARM-blocks in Logic
Hi! I tried to use block ALARM_M in Zenon Logic. How does it connect with alarm in main project? How can I create limit text? Here is my testing FB-shema. Regards. This is a migrated post! Originally posted on 15.08.2014 by user croc. Please be aware
Zenon Logic sample program for EV3 needed
Hi, I am Dimi, my class and I participate in the new Zenon Challenge 2014. I am completely new to Zenon. I have followed the tutorial to connect the EV3 with Zenon, but I can't even write a simple play a sound program without getting errors. Is it possible
Zenon logic
Hello Everybody I have one problem in Zenon V7.0 whenever i created project in Zenon logic with StratonNG driver it is creating project but that project is not opening.And Zenon logic Workbench is present in License version please refer the snap shot
61850 Server
Hello, I would like to use Zenon Logic to provide any Variable I have in Editor as 61850 Variable for other SCADA System. Is there a tutorial availabe how to do so? I am using Zenon Logic for the first time. I already know that Variables in Editor have
TcpConnect Parametrieren
Hallo zusammen, ich habe ein Problem ich möchte über TCP/IP eine Verbindung aufbauen zu Port 5002 am LocalHost. Habe folgendes Programmiert: SOCK := TCPCONNECT( '127.0.0.1', 5002 ); RetValue_1 := TCPISCONNECTED( SOCK ); // Kontrolle ob Socket Verbindung
Covert Hex to Bin
hi :) Please support me how i can convert one value from Hex to Bin format , this hex value coming from PLC over Modbus Protocol,,, another thing how i can using each binary bits individals beacuse each binary bit represents breaker status thanks for
Converting Main Program to UDFB
Hello Everybody, I have created zenon logic in main program(FBD). But i would like to use this program multiple times so i am thinking to convert this main project to UDFB. is it possible? This is a migrated post! Originally posted on 19.10.2013 by user
Re: AW: Using Straton with Zenon
one more question please, i want to create 1500 variables in straton as o out put for zenon, and read around 1500 variables from zenon to straton to do the calculation. its ok with this number of variables or there are a limitation of number? Thanks in
Using Straton with Zenon
Hello Support, I have number of analog readings from the field which i want to do some calculation with it, as the Zenon mathematical variables are limited i am planing to do the calculation using Straton which comes with Zenon, do i need separate Straton
Pointer in Straton
Hallo Kollegen Ich würde der Funktion "VSISTAMP()" eine Variable übergeben. Diese Variable ist ein "IN/OUT" eines Unterprogramms. Gibt es dazu Pointer oder vergleichbares? Welche Datentyp muss der IN/OUT sein? Mfg Karnst This is a migrated post! Originally
External IEC 60850 variables names not recognised in ZenonLogic
Hi I've made externally visible several IEC 60850 variables so that I can do some data type conversions in ZenonLogic. These will then be allocated to IEC 60870 variables. The problem is although the variables are visible in ZenonLogic and values visible
zenon logic doesn't communicate with external variables in zenon
when I create some internal variables in zenon and activate them as externally visible, they are accessible in zenon logic. also the change of values affect both the zenon and zenon logic. but if I use external variables ,e.g from 60870-104 driver, and
Straton in multi servers system
Hello colleagues Can you help me? I use multi servers system. A main HMI server don't have a straton program. Two slave HMI servers use a same straton program. When the main HMI server started one of straton projects on the slave HMI servers began work
IEC 60870-5-104 standard
My question is interrogation group ()COT 21-36) is part of the IEC 60870-5-104 standard or not? if we look for a definition of this standard: IEC 60870-5-101 [IEC101] is a standard for power system monitoring, control & associated communications for telecontrol,
Next Page