C#: Calling page and used filter
Hi there, I try to read out the page name and the used time filter of the page which was triggering the C# code. Target is to read out "...TimeFilter[0].ARVTime1" of different pages with the same program. Zenon V14 Thanks for any help. Regards
Is Zenon supports Oracle Database ?
Hi everyone, In one of the specifications there are 2 clauses like this: The SCADA system will run on the latest versions of MS Windows operating system. The database will be ORACLE. Proposed SCADA software database must be Oracle, SQL database will not
IEEE C37.118 data archiving every 20 ms
Hello, We would like to archive PMU datas. We are getting PMU datas over IEEE C37.118 Zenon logic drive to the Zenon Energy Edition 14. And Resolution of PMU datas are 50 samples per seconds. It can be 200 samples per seconds in some special application
iec 104 select before operate
Hello, I want to send a command type 63 with select before operate. when i look at the receiving end it always comes as direct execute. when we turn off SBO it works, but we need SBO. Under variables i have set Ca, IOA, and Tid, and it is received on
SNMP Engine ID
Dear community! I could not find any information how to config or at least how to see SNMP Engine ID in Zenon SNMPNG driver configurator and manual. Could someone let me know how to do it? Thanks in advance. P.S. Zenon version 14
CEL logging
Hi all, I have question about logging in CEL. We use INT variable for commands (MOTOR_CMD), with the following values 0 - IDLE 1 - START 2 - PAUSE 3 - STOP CEL logging activated via dynamic element and checked Old and New value. So, when operator press
PMU Datas Archiving
Dear Sir/Madam, I would like to archive PMU datas. I am getting PMU datas over IEEE C37.118 logic drive. Resolution of PMU datas is 50 messages per seconds. So I need to archive these datas each 20 miliseconds. So my question is that how should i set
61850 communication issue with bufferd RCB RCB
Hi I have configured a buffered Report Control Block (RCB) in a Siemens relay and imported the ICD file into zenon. However, zenon is not enabling the buffered RCB. What could be the reasons preventing zenon from enabling the report? I have already configured
Set Color Background given an ALC color
Hi everyone, I'm having trouble with the following point. I have several "line" elements representing electrical sections. These lines have 3 different colours depending on the ALC of the "circuit breaker" type elements placed upstream of the line. Not
SQL Read/Write
Hi, I'm trying to read/write some data to sql database. I ran both scripts from documentation creating two tables, created sqlDrv and associated it with a variable. But after writing some value to this variable my database table is still empty. I am using
Driver errors
Hello, Please refer to the attached photo, whenever we run the runtime we are always experiencing 100% CPU usage which causes the server to be unresponsive and takes a long time to load. Many drivers are showing this error. Please advise us on how to
Show user that changed value of variable on a report
Hi! This question is between Engineering Studio and Report: There is a way to save the username from a user that changed the value of a variable on the same dataset (Img 1) as the variable data, so I am able to make a table with a column describin the
Zenon hmi software for scada energy edition
what specical features and technical specification has zenon that make zenon hmi software unique compare to other platforms like survalent doesn't has?
Exporting Reports and Events to PDF Format in zenon
I would like to know if it is possible to export Reports and Events to PDF Format in Zenon. If this functionality is available, could someone please guide me on how to do it?
How to access custom data type variables?
Hi! I have a variable with a custom data type like: How can I access FIELD_1, FIELD_2 and FIELD_3 using the API so I could write/set value to those fields?
Überprüfen des Schreiberfolgs von IVariable.SetValue()
Guten Tag, zur API der Add-In-Framework-Klasse Scada.AddIn.Contracts.Variable.IVariable habe ich eine Fragestellung: Wie kann sichergestellt werden, dass ein über die Methode void SetValue(int index, object value) geschriebener Wert tatsächlich über den
Zenon 14 Installation failed
Hi, I am trying to install zenon 14 but the instalation failed. Can i get some helh to figure out what is causing this error? This is the log: [410C:1B08][2024-05-29T10:35:46]i323: Registering package dependency provider: {ED4CC1E5-043E-4157-8452-B5E533FE2BA1},
Alarm duration
Is it possible with the "Alarm Active" Time to combine every time the alarm appeared. I want to see the top 5 occurring alarms with total time active
String in Interlocking Formula
As title say, can I use a string value from a variable in the interlocking formula? If so, how? For example: -Thanks!
OPC UA Alarms & Conditions
Hi, according to the driver documentation, Zenon 14 supports Alarms & Conditions for OPC UA. I tried to follow the steps in the documentation and I am getting the proper json string on the event notifier variable as configured with the select clauses
Can't read variable from ZENON in API C#
I have tried all Syntax I can still can't Read an Integer Value from Variable in Zenon Please if you know how to Read and Store the Value in C# VAR let me know...
test to ticket
test
Zenon 7.50 Build Update error Root Certificate not installed
The Zenon build update we are trying to install gives us the error below saying the root certificate is not installed. What does this mean? Why are we getting this error on the HMIs? We did not get this error when we installed the build on the serve
Automation Script Logic Studio
I want to create an Automation Script but it appears to me that I don't have that option available. How can I get the option available to me? I've attached picture of how the Help looks and then my logic studio.
Comtrade File Viewer WPF
Hello friends. Please could someone give me a current link to download the Comtrade file viewer, I can't find it in the download area of the Copa Data page. Thank you.
Error when starting the drivers for project 0x8001011f
Hi, I am geting an error 0x8001011f when starting runtime. I get the same error if I want to open the driver. And the same error if I create new workspace with new project but for internal drivers. The whole error Error when starting the drivers for project
Zenon 11 installation failed
Hello, I'm trying to install the Zenon 11, but my intallations have failed. Can someone help with this? I attached the erro log.
Zenon Academy
Into Smart object topic in Zenon academy it has Version12 training project available. Can anyone tell me how we use it for version 10? As my system has version 10 in it.
Service 'zenDBSrv.exe' on server 'localhost' is not running!
when i try to create new project what to do now can anyone explain me step by step
Unhandled Exception Occured!
Hi, in our company we use Zenon 7.6 and all computers have the same error, after we install it on a new computer it works for a few hours and then this error appears again. we have already installed the visual update ´(Microsoft Visual Studio 2015-22
UDP Communications in Logic.
Hello, I cant get a UDP connection to work in logic. Do i need anything more than udpCreate, udpAddrMake, udpIsValid and udpRcvFrom to recive some test data? I do not have a fieldbus driver or profile or binding. udpCreate returns 0. all other return
Zenon 10 Installation Build 81649 - TcSysUI.exe - System Error
Hi, During the installation of a Zenon i see a Popup with header "TcSysUI.exe - System Error" "The code execution cannot proceed becouse mfc140u.dll was not found." I did read about this and it is apparently becouse of a C++ Redistribudable. I don t have
Process Gateway (OPCUA) Issue
Greetings all, I have a project (Zenon 12 - latest build) that utilize an OPCUA process gateway, sometimes the configuration resets it self and retrieve an old configuration. Sometimes new tags added are not shown when I use Matrikon or any other OPC
Using SystemNet.Mail Into a C# add-in for zenon
Hello, I am currently developing an add-in for zenon 12 for my company and I would like to send emails directly from my add-in. The previous solution was to call a zenon function that would call a python script that is responsible for sending the email,
Prevent variables initial values to be shown in AML
Hi! As the tittle says I want to prevent AML to show variables that its initial value are out of the limits. Lets say I have VAR_1, with limits: Min: 5 Max: 10. But the inital value it's 0. This 0 is displayed in the AML and I want to prevent that until
Driver: Intern - Driver for internal variables
Hallo, I've successfully configured a client-server SCADA model using Zenon 12 Energy Edition for a substation. The server-side functions as expected, with the alert icon flashing appropriately when alarms occur. I'm using an internal variable named "Alarm_Area_Status"
Create report in report engine
Hi Everyone I have a license key for 'Report Engine, Data Hub, Identity Service' so is that enough data and conditions to create a report on the report engine that other parties can access to create reports? Thanks for
CEL Not showing up in active historian
Hi, I have a report configured to recive data from CEL, but when I try to open the report configured to show only the last active report (img) the CEL is empty. I also have the same equipment modeling linked to the dataset and the historian. What am I
Network service with COPADATA PRP
Hi, I have problems with ZEE12 network services for redundancy or client-server configuration (which use network service), but ONLY when i use COPADATA PRP. Using the same project, without PRP or using SEL PRP driver, we DONT have any issue. In other
Asign data from historian to a variable
Hi, as the tittle says I'm tring to figure out if it's posible to read data from a lot that has already been saved to historian and asign it to a variable. For example: I got 3 lots, lot1, lot2 and lot3; with this structure: lot_name, lot_type, lot_description.
Next Page