Server Redundancy Issue

Server Redundancy Issue

Hi, this has been asked previously but there was no reply...

I have 2 Redundant Servers and I configured it in client-server mode...

My selection in Redundancy Setting is Software Redundancy. Redundancy mode is Non-Dominant.

If server 1 (which is primary server) is shutdown/Runtime is closed, then the server 2 (which is standby server) changes over to primary server.

When the server 1 is turned back on/runtime is opened, the server 1 becomes standby server and server 2 remains as primary server.

ISSUE:
But when any Ethernet cable is failed/removed from server/ethernet switch failed, then both of the servers become primary servers..

When both servers are ON and the runtime is also ON, the status are:
  1. server 1: server 1 is primary server and there is no standby server
  2. server 2: server 2 is primary server and there is no standby server
Can any one help me out from this.

I'm Reading the Status of Servers for System driver variable i.e., [Network] Standalone/Primary Server/Standby Server/Client.

    Disclaimer

    This document governs the use of our Community Forum. By registering and using the platform, you accept these conditions.

    The COPA-DATA Community Forum serves to encourage the exchange of information and experience about the zenon software between forum users respectively zenon users.

    Please mind that any published information on the Community Forum is the subjective opinion and view based on the experience and the level of knowledge of the author. COPA-DATA does not overtake any responsibility for the content and the accuracy of the shared information.

    Users of the Community Forum are encouraged to share only well-founded experiences and to point out any risks associated with the implementation of proposed solutions to problems. COPA-DATA at its absolute discretion, reserves the right to moderate the forum. In this connection COPA-DATA may remove any information containing false facts, potentially dangerous solutions, bad language or content that may insult, degrade or discriminate others. COPA-DATA may block a non-complying user from forum access if the user violated this provision.

    COPA-DATA reserves the right to change this document from time to time at own discretion.


    Ing. Punzenberger COPA-DATA GmbH
    Karolingerstraße 7b · 5020 Salzburg · Austria
    www.copadata.com