"Offline"-Folgearchiv zeigt Werte vom Rohwertarchiv
Hallo,
ich habe ein seltsames Verhalten bei der Archivwertanzeige im Bildtyp Archiv-Nachbearbeitung.
Ich habe einige Stand-Alone Systeme mit laufendem Archiv.
z.B. gibt es ein Rohwert-Archiv A1, mit 1 Sekundenwert-Abtastung und 5 Min Speicherzyklus.
Darauf basierend wird ein 5 Minuten Folgearchiv A2 gebildet,
und basierend auf A2 noch ein 1 Tagesarchiv A3.
Die Kette ist also A1 -> A2 -> A3
Auf dem Stand-Alone System wird auch alles wunderbar und richtig im Archiv-Nachbearbeitungsbild angezeigt. Die ARX Dateien werden fleissig geschrieben.
Nun gibt es ein weiteres System für Analysen und Projektierung, das Offline ist und ein Migrationsprojekt hat. Die Stand-Alone Systeme sind Bestandteil dieses Migrationsprojektes. Es gibt aber keine Server-Client Beziehung oder irgendwelche Prozesskommunikationen - es ist alles Offline.
Ab und zu wird eine Dateisicherung eines Stand-Alone Systems inklusive der ARX Dateien eingespielt.
Das Offline System hat nun auch die Archivwerte vom Stand der Sicherung.
Die Archivwerte von A1, A2, A3 werden in in den ETMs, Reports und CSV-Archivexports richtig angezeigt (also jedes Archiv für sich getrennt).
Nur im Archiv-Nachbearbeitungsbild werden die ARX Dateien durcheinandergewürfelt.
z.B. bei einer Abfrage auf A2 sollten auch nur Werte aus den A2*.ARX Dateien angezeigt werden. Es sind aber auch A1*.ARX Inhalte dazwischen.
Lokal auf den Stand-Alone Systemen passiert das nicht.
Woran könnte das liegen ?
Schöne Grüsse
This is a migrated post! Originally posted on 03.02.2012 by user wrs402. Please be aware that information can be outdated.
Disclaimer
This document governs the use of our Community Forum. By registering and using the platform, you accept these conditions.
The COPA-DATA Community Forum serves to encourage the exchange of information and experience about the zenon software between forum users respectively zenon users.
Please mind that any published information on the Community Forum is the subjective opinion and view based on the experience and the level of knowledge of the author. COPA-DATA does not overtake any responsibility for the content and the accuracy of the shared information.
Users of the Community Forum are encouraged to share only well-founded experiences and to point out any risks associated with the implementation of proposed solutions to problems. COPA-DATA at its absolute discretion, reserves the right to moderate the forum. In this connection COPA-DATA may remove any information containing false facts, potentially dangerous solutions, bad language or content that may insult, degrade or discriminate others. COPA-DATA may block a non-complying user from forum access if the user violated this provision.
COPA-DATA reserves the right to change this document from time to time at own discretion.
Ing. Punzenberger COPA-DATA GmbH
Karolingerstraße 7b · 5020 Salzburg · Austria
www.copadata.com