Recent Topics
Accessing String Variable Value At VBA
hi, I am tryig to read and write an internal string variable using VBA on zenon V11. While I've managed to successfully write to the variable, I'm encountering a bit of a challenge when attempting to read its value. I'm receiving a Run Time Error whenever
Serial number is required when trying to start Zenon Engineering Studio.
Hi, So I have finished installed the Zenon 11. When I try to start the "zenon engineering studio" . It shows this error. How can I solve this? Thanks in advance. Best Regards, HUSEIN
Writing Values without Unique Write/Modify functions
Are there other ways to set one non-boolean variable to one value using a pushbutton without creating a unique function for every single instance? I am building a relatively simple zenon HMI and must be missing something. I am making screens for equipment
WPF Sankey Input and Output Limitation
Hello all, Zenon Sankey is limited to only 26 Inputs and 26 Outputs. Is there a way to customize the WPF element in order to accept more than 26 in/out ? P.S. I used the Sankey Wizard to make the XML file and then used the .cdwpf as a WPF and set the
Zenon Software 11 Installation error
Hi, I am trying to install Zenon 11 in my laptop. But it failed, it showed the error like at the attached image. Can help me to fix this issue. Thanks. Also attached is the LOG file
Zenon 10 ini files config options
Where do i find all possible configurations for ini files for Zenon 10 please? (zenon6.ini forexample) I tried, there is Manual only for Zenon 7.11, 7.60 and 8.00 Is there only online help after Zenon 8.20?
Maximum capacity of tags in "UNLIMITED tags" License.
Hello Team, What is the Maximum Tags can be used in the License which is : I need to know the approximate count. My requirement is around 200K to 250K. Thanks, Raja
How does Historian Server works and What kind of License is required for the Individual Historian Machine.
Hello Team, In my Substation Architecture, I have 1. Primary Zenon Server 2. Secondary Zenon Server 3. Historian Server So my query is, I have one dedicated Historian Server Machine. How can I use of this machine as a Historian and what kind of License
AT commands through Ethernet is Possible?
Hello Team, I have one query regarding the AT Commands (Message Control). As per the Manual, the AT Commands cab be sent via COM Port. Can it be sent through Ethernet also? Is it possible? Thanks, Raja
Zenon8.0 integrated Sub-Project Runtime HMI Functions not working / click not working on any buttons
In the integrated Project , i have integrated the one Project This project Runtime works fine in the secondary server & client however , at Primary server HMI Runtime is starting but Functions not working on screen / no click accepts on buttons .
Communication between HMIs
Hello! I have to separate HMI with Zenon Scada on it, they are connected to each other via Eth. They controll the same process from two different places (They are nearly the same project), I would like to provide data exchange between them, what possibilities
opening .prj project file
Hello all, Fairly new to zenon software. I received a zenon project from a client, build by a OEM builder a few years ago. Client asked me to integrate a few new alarms to this zenon application. I am not able to open this project because it has an ".PRJ"
how to make a animated icon in zenon software?
i like to make a icon that consist of animation such as fan with rotate when we trigger it, how does the step can be perform?
SLD Link Combined Element Across Projects
Greetings, Currently I have applied the Integrated Project concept where multiple projects are contained in a main wrapper project. Everything is working as it should and I'm happy with the results so far. At each project here is an SLD screen that contain
New user in runtime
Dear all, I have a project with 3 users, the authorization levels are defined using user groups. One user is Administrator, another a Power User and a Simple user. Power User is not allowed to create/edit other power users, so my expectation: User - can
OCPP driver configuration
Hi, does anyone know how to configure OCPP driver in zenon? I have been using the charge point from here: https://github.com/mobilityhouse/ocpp to connect to the zenon CSMS but it doesn't work. The pictures attached below shows my current configuration.
Buffered Report IEC61850
Hi, i configured Bufferd report in Siemens Siprotech 5(850 server) devices and established connection with zenon. we started testing buffer report in following ways. 1. i removed all/both fiber from the siprotec device(iec61850 server) 2. initiated some
Equipment Group column on printed/exported document
Hi, I require to show the information of Equipment Group column for AML and CEL on printed/exported document but I can´t find the way to include it in FRM file (key word) nor RDL file (dataset). Is it possible to show the Equipment Group column in PDF
WPF Element
Hi Can anyone advice where can download more WPF elements for using in Zenon? I only got some WPF files from COPA DATA download website. Any more WPF files can we use? for example WPF pie chart? Please advise if where can get the resources. Thank you.
Scada.AddIn.Contracts.License - SerialNumber
Hi all, I am trying to get the serial number of the license in the service engine that is running. I use a C# Addin and Zenon 11, and I see in the online help that it is readonly (fine), and available for "engineering studio" and "service engine", but
IEC850Srv Problem Zenon Basic Training - Energy
Hi! I have a problem with IEC 850 Server. I'm making Zenon Basic Training - Energy course, I'm in chapter LessonDrivers & variables I read a backup project (IEC61850_SERVER_SIM) which contains simulation for the training (all of the backups are in the
Development environment setup
Hi, We are looking to setup a development environment, where several people will need to access workspace/projects and develop at the same time. I understand that version control solutions (like svn) are not an option, due to the nature of the binary
Start Screen with Integrated Projects
Hello, I have 5 subprojects within a wrapper main project. I want to launch 3 screens (top navigation, bottom navigation, and main scada screen) at the main project at startup. I deleted all AUTOSTART scripts from all subprojects and only added it to
Server Redundancy Issue
Hi, this has been asked previously but there was no reply... I have 2 Redundant Servers and I configured it in client-server mode... My selection in Redundancy Setting is Software Redundancy. Redundancy mode is Non-Dominant. If server 1 (which is primary
How accurate is the RTC function blocks in Zenon Logic ?
Greetings all, Does the RTC built-in function blocks in Zenon Logic reliable to use in a time critical application ? I'm trying to calculate the amount of energy consumed by a device using a custom soft totalizer I wrote in Logic. If I used the RTC functions
Dynamic Variable GET_SmartObject_Instance_Name
Hi All, Is there any function/system_variable to GET SmartObject Instance Name in Engineering Studio??
Insert Symbols in Runtime
Hi all. Our company uses Zenon ver 10.0. We need to put a symbol like Warning Sign in Runtime but It seem like there is no function like this in Zenon. Is there any solution for us? Many thanks
Function of SubProject Script is not saved on MainProject button properties
Hi all, I have created Main project with SubProjects. For some reason I cannot save Subproject a function link in the Main_Nav button to execute a script of subproject. After I close the Main_Nav screen and reload in Engineering Studio, the function link
Moving virtual machine to an other ESX - What about license management ?
Hello everyone, I have questions about license management when a virtual machine is moved to an other ESX. Currently, the dongle type used is "Software Dongle - Virtual Machine Standard". Do you know is there risk of losing license during this moving
Grafiken werden auf manchen Smart Clients nicht angezeigt
Hallo zusammen, neuerdings bekomme ich von verschiedenen Kollegen die Mitteilung, dass bei ihren Smart Clients diverse Grafiken entweder gar nicht mehr oder nur ab und zu angezeigt werden. Diese Grafiken sind jeweils .jpg, .gif oder .png Dateien, die
Error: Too many I/O Variable
I have an issue compiling my project. It shows an error: Too many I/O Variable. I tried the suggestion from the other forum discussion by doing this: Settings > General > Complex variables in a separate segment > Yes But logic service still prompted error.
Web Server client issue
After compilation following error shown " No HTML Web Engine data file (.webx) has been created.
SQL evacuation
I have saved process data and evcacuate them in a SQL Database by Zenon Historian. However, As the picture description attachedwhen the Query is in SQL Database, it does not see the Variable.
i want mouse hover effect
i have made a transparent button and put behind my original button then i paste this in "this project" Public LastMouseOverElement As Element Public LastMouseOverElementBackColor As OLE_COLOR and created 2 macros for mouse over event as you can see in
Any chance to add Project Version in File Backup
Hello Team, Any Option to add the Project Version to the File name of Backup. It will be very helpful in managing the Project with Multiple users. For Ex: 2023-07-14_11-39-32 projectname1.1.zip Thanks, Raja
Command Processing Missing
Hi, I'm new here, trying to go through the basic training course with the Energy edition. I can't seem to find a way to display the 'Command Processing' option within the Project Manager. Are there any additional files I should be looking to install?
SQL Services Reporting Services Properties is NOT STARTING
Hello Team, I came across one issue in which the SQL Services Reporting Services Properties is NOT Starting. Due to this I am unable to Uninstall the Current version and also It is not allowing me to install any New Versions. Can you please help out?
Can we give access only Windows+E when the Keyblock Service Engine Start is activated.
Hello Community, Can we enable only Windows+E , When the Keyblock Service Engine Start is activated. Customer requirement is that, All the users should have a access to only FILE EXPLORER even when the Keyblock Service Engine start is activated. Is it
Integration project.
Hi I need add/update more the one project at the same time in different areas , after that i need area A compile the project also area B compile another project. I have one server with two data engineering workstation . every one data engineering workstation
Zenon Runtime error
I am using IEC850 driver in Zenon 7.11 to communicate with a SEL IED. After starting the Runtime it is always reported a message "zenNetSrv.exe: Module could not be loaded! (Last error 0x00000000) ". Once I uncheck "Network Active" option then its working
Next Page